Specifications

21
Stationary Applicator Valve 97113/97114
The Stationary Applicator Valve is a robust dispensing valve designed for pressure-time applications. This valve
is a modular design comprising a valve body and a pneumatic valve actuator, providing quick on-line serviceability.
It also incorporates an adjustable suck-back feature which prevents dripping or stringing. The Stationary Applicator
Valve 97113 is fi tted with a
1
/4” tube fi tting for viscosities up to 10,000 mPas; model 97114 is fi tted with a
3
/8” tube
fi tting for higher viscosities.
The dispensing valve has a double-acting pneumatic actuator with spring assisted close. Separate adjustment of the
two throttle valves achieves adjustable opening and closing speed for process control. These valves can be used in
stationary mounted applications or in combination with an advancing slide.
Recommended products: Acrylics, anaerobic adhesives, gel-type cyanoacrylates and light curable adhesives
Technical Specifi cations:
Weight 340g Dimensions (W x H x D) 180 x 64 x 35mm
Product Pressure max. 12.5 bar (180 psi) Air Input min. 4 bar (60 psi), fi ltered
to a maximum of 10µm
Product Outlet
1
/4”-26 UNF Luer-Lock output
fi tting
Features:
• Robust, seal-less dispensing
valve
• Modular design of product
shutoff valve & valve actuator
provides on-line serviceability
• Fail safe – spring assisted close
• Adjustable suck-back feature
eliminates product dripping and
stringing
• Double-acting cylinder allows
adjustable opening and closing
speed for process control
Light Cure / Cyanoacrylate Dispensing Valve 98009/98013
The Loctite
®
Light Cure / Cyanoacrylate Dispensing Valve provides high-resolution stroke adjustment for accurate
dispensing of small amounts of all low to medium viscosity adhesives. It is designed specifi cally for pressure-time
applications and must be used in conjunction with a controller and product reservoir.
The dispensing valve has single acting, spring return, stroke control. Fine adjustment of fl ow rate is achieved by
turning the fl ow control dial on top of the valve. The valve can be used in stationary mounted applications or in
combination with an advancing slide.
Recommended products: 98009: Light curable adhesives,
anaerobic retaining compounds, anaerobic threadlockers
98013 : Cyanoacrylate adhesives
Technical Specifi cations:
Weight 130g
Max. Input Fluid Pressure 5 bar (70 psi)
Mounting Hole (1) 10-32 UNF
Dimensions (W x H x D) ø 78.5 x 30mm
Air Inlet Port
1
/4” tube fi tting
Air Input 5-6 bar (70-90 psi), fi ltered to a maximum of 10µm
Features:
• For applying miniature amounts
• Compact size and weight
• Stroke adjustment for fi ne-tuning
dispense characteristics
• Fail safe – spring assisted close
• Diaphragm valve, no seals
• Bubble free, no-drip dispensing