Specifications

19
ErgoLoc Valve 97130
The Loctite
®
ErgoLoc Valve provides excellent compatibility with a wide range of Loctite
®
products including
cyanoacrylates. Valve body and stem are all PTFE lined to prevent premature curing. It is suitable for dispensing small
drops and beads of low to medium viscosity products up to approx. 10,000 mPas (max. product pressure is 2 bar or
30 psi). The slim ergonomic design reduces hand fatigue.
Loctite
®
ErgoLoc Valve has been designed specifi cally for manual dispensing. Combined with a semi-automatic or
automatic controller it is suitable for low to medium viscosity adhesives.
Recommended products: Low viscosity cyanoacrylates, acrylics, anaerobic adhesives, activators and primers.
Technical Specifi cations:
Weight 140g Dimensions (W x H x D) ø 40 x 170mm
Air Input 4-7 bar (60-100 psi), fi ltered to a maximum of 10µm
Accessories Item # IDH No. Accessories Item # IDH No.
Finger switch 97293 531803 Product feedline 97972 142646
Features:
• Forward closing – avoids
air entrapment and potential
premature curing of
cyanoacrylates
• Stroke adjustment for fi ne-tuning
dispense characteristics
• Quantity: 0.005g up to
continuous bead
Features:
• Ergonomic design provides
comfortable handling
• Suck-back feature to prevent
post-dispense dripping
Hand-Held Applicator 97111/97112
Loctite
®
Hand-Held Applicator 97111 is suitable for dispensing Loctite
®
products in manual work stations.
The operator controls the amount of application.
Loctite
®
Hand-Held Applicator 97112 is suitable for dispensing Loctite
®
products in semi-automatic processes.
This ergonomically designed applicator with pistol grip provides hand comfort and application control to eliminate
hand fatigue and improve dispensing accuracy. The 97112 Applicator is actuated using a foot switch (97201) or an
electrical fi nger switch (97236).
An air signal sent to this valve opens the pneumatic actuator, allowing adhesive to fl ow. It also incorporates an
adjustable suck-back feature which prevents dripping or stringing. The Hand-Held Applicator is closed by spring return
of the shut-off piston.
Recommended products: Acrylics, anaerobic adhesives and light curable adhesives.
Technical Specifi cations:
Air Input (97112)
min. 4 bar (60 psi), fi ltered to a maximum of 10µm Dimensions (W x H x D) ø 28.5 x 162mm
Product feedline
connection
1
/4” Weight 340g
Pinch Valve Applicator 97121
The Pinch Valve Applicator provides excellent compatibility with all Loctite
®
products, in particular cyanoacrylates.
It can dispense small drop sizes of low to medium viscosity products. This ergonomically designed applicator with pistol
grip eliminates hand fatigue. Ease of feedline replacement offers customers a high degree of fl exibility for changeover
to a different product. The PTFE product feedline of the Pinch Valve is protected by an additional outer tubing. A single
acting cylinder is used as actuator. The Pinch Valve Applicator is closed in idle position. The product feedline is closed
and pinched off by the cylinder piston of the actuator assembly. The Pinch Valve Applicator can be mounted on the
reservoir lid or be used as a stationary applicator unit.
Recommended products: Cyanoacrylates, acrylics, anaerobic and light curable adhesives, activators and primers.
Technical Specifi cations:
Air Input min. 5 bar (72 psi),
fi ltered to a maximum of 10µm
Weight Valve: 240g
Pistol grip: 100g
Dimensions (W x H x D) Valve: 120 x 97 x 32mm Applicator pencil: ø 28.5 x 162mm
Features:
• Easy assembly of the valve
onto the reservoir lid
• Lightweight design achieves
comfortable handling of the
applicator pencil