Specifications

12
Features:
• The bag package is ideal for
anaerobics because of its
high oxygen permeability
• Clean operation without risk
of contamination
• Product low level sensors for
“refi ll” and “empty” signals
•
Minimum of residue left in the bag
• Minimum of packaging waste
Features:
• Product delivery via pneumatic
diaphragm pump
• Operational with semi-automatic
and automatic controllers
• Integrated low level sensor
for adhesive level monitoring
• Prevents air entrapment during
dispensing
2 Litre Bag Dispenser 97124
The Bag Dispenser 97124 is designed for anaerobic adhesives and sealants in Loctite
®
2 litre package. It can be used
preferably in conjunction with Controller 97152, but also with models 97153 or 97102, for supplying Loctite
®
products
to a dispensing valve.
After loading a 2 litre bag into the reservoir, the seal of the bag is punctured using a piercing element. Then the
reservoir is pressurised from a Loctite
®
Controller. The dispensing pressure in the reservoir (regulated air from the
controller) squeezes the bag and feeds the product through the feedline to the dispensing valve. An integrated
pneumatic cylinder presses a pusher plate against the bag in a controlled way. This action avoids twisting and crushing
of the bag.
When the package is empty, a beep will sound, and an “EMPTY” message appears on the digital display of the
controller. A red LED also lights up on the control panel of the reservoir. The reservoir is depressurised automatically by
the controller 97152. The return travel of the piston is performed manually on the hand lever valve.
The bag is sealed to prevent intrusion of compressed air, this avoids bubbles in the product fl ow.
Technical Specifi cations:
Air Input 4-8 bar (60-116 psi), fi ltered to a
maximum of 10µm
Dimensions (W x H x D) 185 x 689 x 230mm
Weight 13kg
Supply Pump 97809
The Supply Pump has been designed for bubble free delivery of low to medium viscosity anaerobic, UV and
cyanoacrylate adhesives without fi llers, as well as activators. It can be combined with controllers 97102, 97152 and
97153, or with VoluBrane Pump 97643.
The advantage of this system is that, unlike the pressure tanks, it will not directly pressurise the fl uids; instead, a
diaphragm pump feeds the product forward, reliably preventing entrapment of air bubbles. The original Loctite
®
bottle
is placed into the reservoir, and the cap is replaced by a suitable adapter. The adapter must be ordered separately.
The product pressure (regulated air) for operating the pump is set on the controller. The supply pump has a low level
sensor for adhesive level monitoring.
Technical Specifi cations:
Air Input 2-7 bar (30-110 psi), fi ltered to max. 10µm Weight 6.8kg
Dimensions
(W x H x D)
170 x 305 x 270mm
Accessories Item # IDH No.
Bottle adapter for 1 litre containers 8953293 1135959
Bottle adapter for 500ml containers 8953294 1135957
Bottle adapter for 250ml 8953295 1135956