Specifications

26
“Two-Step” Spot Repair System
• Remove minor surface defects that protrude through clear coat.
• Achieve OEM results in your shop.
• Eliminates swirl marks, “hazing” and sanding scratches common
with other methods.
Step 1
Using Model 57502 Mini-Random Orbital Sander, place the sanding disc
slightly off-center of the defect with slight pressure on the pad. Throttle
the tool on, and sand in a random pattern for 2-5 seconds. Water must
be used for sanding lubrication. Apply water directly to the disc. Keep the
sanding pad flat while sanding. Throttle the tool off and remove from
surface. Let the tool and the abrasive do the work. Keep the area sanded
as small as possible. Wipe the area clean when finished with a clean
non-scratching cloth.
Mini-Random Orbital Sander
Model 57502
• 7,500 RPM. Includes 54035 Sanding Head (accepts 3" and smaller
dia. sanding pads with male locking-type threads).
Step 2
Apply a small drop of polishing compound. Using Dynabuffer (3" or 5"
diameter models), use the buff to spread compound evenly over spot.
(Note: precondition pad by evenly spreading compound directly on pad.)
Place the buff on the sanding area. Apply approx. 10 lbs. of force to the
work surface, throttle the tool on, adjust force as required, and buff in a
random pattern for 5-10 seconds. Keep buff flat or slightly tipped forward.
Feather the area with lighter pressure for two seconds. Wipe the area
clean with non-scratching cloth and inspect. If scratches are still visible,
re-polish as needed.
Dynabuffer
• Features a 14 mm diameter offset orbit.
• Tools run at 10,000 RPM free speed.
• Patented balancer compensates for vibration when running under load,
resulting in a smooth operating performance (Patent 6,206,771).
• Rear exhaust muffler design reduces sound levels.
Model 10127
3" Diameter
• Includes 56142 Backup Pad and hanger bracket.
• 90070 Foam Buff must be ordered separately.
• Optional 53163 Side Handle available.
Model 10745 (Not Shown)
5" Diameter
• 90063 Foam Buff and 56195 Backup Pad must be ordered separately.
Model Motor Motor Sound Maximum Air Flow Hose I.D. Size Air Pressure Tool Weight Length Height
Number hp RPM Level CFM/SCFM Inch PSIG Thread Pound Inch Inch
10127 .16 7,000 74 dB(A) 3/20 3/8 90 5/16"-24 Female 2.0 8-1/4 3-1/8
10745 .36 10,000 79 dB(A) 3/20 3/8 90 5/16"-24 Female 2.7 10-1/4 4-1/2
57502 .05 7,500 70 dB(A) 1/6 1/4 90 1/4"-20 Male 1.7 5 3-5/8
Additional Specifications: Air Inlet Thread 1/4" NPT
Model 57502
Step 1
Model 10127
Step 2
Foam Buff Pads
90070 90063
3-1/4" Diameter 5" Diameter
90071
95 mm Diameter
90070
Model 10127
Step 2
Tool Hanger
Bracket
Tool Hanger
Bracket
Model 57502
Step 1