Specifications

21
Dynaline 8 " Board Sander
Non-Vacuum
Model 10400
• Includes 57454 PSA Pad for 2-3/4" wide x 8" abrasive paper.
• 3-2/3" x 7" and 2-3/4" x 11" pads are also available.
• Reattachable abrasive sheets may be mounted with optional
"short-nap" hook-face pad.
Central Vacuum
Model 10404
• Includes 57455 PSA Sanding Pad. Ready to connect to your central
vacuum system or shop vac.
• Mount 2-3/4" x 8" vacuum paper (6-hole).
• Optional 57474 Punch Plate for 2-3/4" x 8" pad and 57476 Punch
Plate for 3-2/3" x 7" pad are available to convert to vacuum paper.
• Ultra-smooth in-line sanding action.
• Tool’s precision gear-set provides unstoppable sanding power
with control.
• 2,400 strokes per minute; 3/8" long sanding stroke is very
consistent.
• Ideal for areas where a conventional long board sander is too big.
• Adjustable speed control. Rear exhaust.
• Not a “jitterbug” type sander.
• Piston driven sanders don’t even come close to this tool’s
performance.
• Contoured specialty pads available on page 57.
Optional Punch Plate
Model
10400
Model
10404
1" Dia.
Vac Port
Model Motor Stroke Strokes Sound Air Flow Rate Air Inlet Hose Air Pressure Weight Length Height
Number hp Inch per Minute Level CFM/SCFM Thread Size PSIG Pound Inch Inch
All Models .25 3/8 2,400 85 dB(A) 3/18 1/4" NPT 1/4" 90 2.6 7 3-3/4
On Non-Vac Model, Pad Can Be Rotated 360° and Set
at Any Comfortable Position. No Other Tool Like It!
On Non-Vac Model, Pad Can Be Rotated 360° and Set
at Any Comfortable Position. No Other Tool Like It!
360° Pad Rotation!
Set Pad to Desired Position!
Loop Face Pad
Part No. 56324
• Compatible with reverse
hook ‘n loop abrasives.