Specifications

19
Wet Dynafine
®
Detail Sander
Model 10880
• Tiny 1/32" diameter orbital action for a superior finish.
• Hooks directly up to hose or optional wet tank.
• Perfect for quick spot repair and efficient removal of dust nibs on clear
coat paint systems. With built-in misting system, operator can spray
the work surface then remove the imperfection – all within seconds!
• Powerful .15 hp air motor, 13,000 RPM.
• Accepts 2" and 3" diameter sanding pads (PSA or hook-face) for
corresponding abrasive discs. One PSA pad of each diameter is
included with tool.
• Misting System helps flush abrasive to achieve a consistent, repeatable
finish.
• Ergonomic 7˚ offset design for greater operator comfort and control.
• Rear exhaust directs air away from work piece; reduces sound levels.
• Insulated tool housing reduces cold air transmission to the operator.
• Includes 10 ft. water line with Male Quick Disconnect and faucet/
garden hose connection (see below).
• Optional hook-face pads available on page 57.
Model Motor Motor Sound Air Flow Rate Hose Air Inlet Weight Length Height
Number hp RPM Level CFM/SCFM Size Thread Pound Inch Inch
10880 .15 13,000 65 dB(A) 3/20 1/4" 1/4" NPT 1.75 9 3-3/4
Includes Faucet/Garden Hose Connection
Optional Portable Wet Tank
Part No. 96575
• Two gallon capacity. Makes wet sanders
self-sufficient; no need for a garden hose.
• Translucent tank allows easy viewing of
liquid level.
• Hand pump manually pressurizes
container (50 PSI maximum pressure).
Composite Dynaswivel
®
Flow-Control Speed
Regulator is included.
Features Our
“Finger Touch”
Misting System
for Total Water
Control!
Features Our
“Finger Touch”
Misting System
for Total Water
Control!
2" Dia. Pad
Shown