User's Manual

1. Attach air supply to the Air Inlet Connector (6), attached to the Leader Hose (5),
extending from the side of the Auto-Rewind Air Hose Reel.
2. Attach the gun or tool you will be using to the Air Hose Tool Connector (6A), tip.
3. Make sure you are wearing ANSI-approved goggles before starting your air
compressor and be sure to grip the tool firmly in case air is escaping. This
prevents the tool from flopping around, possibly causing damage, or personal
injury.
4. Never let go of the hose during use.
SKU 95211 Page 4For technical questions, please call 1-800-444-3353.
BASIC OPERATIONS
PARTS LIST
No. Description Qty
1 Screw ST4 x 20 20
2 Side Covers 2
3 Right Angle Connector 1
4 Collar 3
5 Leader Hose 1
6 Air Inlet Connector 1
8 Right Cover Panel 1
9 Pressure Air Hose 1
10 Hose Reel Stopper 1
11 Screw M4 x 20 2
12 Hose Collar Clips 2
13 Inlet Air Base Nut 1
14 Air Hose Connector 1
15 Air Inlet Base 1
16 Inlet Base Cover 1
No. Description Qty
18 E - Clamp 2
19 “O” - Ring Ø14 x Ø2 2
20 Pin 1
21 Axle 1
23 Locking Wedge Pin 1
24 Spring 2
25 Drum 1
26 High Tension Main Spring 1
27 Spring Cover 1
28 Screw M10 x 25 4
29 Left Cover Panel 1
30 Screw M10 x 25 2
31 Bolt Washer Ø13.5 xØ21 x 4 2
33 Bracket Attach Nut M10 2
34 Mounting Bracket 1