Specifications

G73
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatics
Flow
Controls
Integrated
Fittings
SensingControl
Panel
G
Accessories
ED Series
Catalog 0600P-E
Zero Loss Condensate Drain
Zero air loss condensate drains are designed for economical
removal of unwanted water, oil emulsions, and other liquids.
These drains will only open when liquid is present and will
not allow any compressed air to escape from the system.
Compressor with aftercooler Receiver tank Filter Air dryer Drip leg
Removes the condensate that is collected
after the air cools in the aftercooler
Removes the condensate
that is collected when
the air cools inside of the
receiver tank
Removes the
condensate that is
collected in the filter
bowl
Removes the condensate
that is collected in the
air dryer
Point-of-use applications:
removes the condensate
from compressed air
pipes in a plant
Where are condensate drains used?
Operating Information
Maximum pressure 232 PSIG (16 bar)
Ambient operating temperature 35°F to 140°F (1.6°C to 60°C)
Voltages NPT 115/50-60Hz, standard
Optional: BSPP ports 230/50-60Hz & 24VDC
Zero Air Loss Condensate Drains
Port size
(NPT)
Compressor
aftercooler (SCFM)*
Capacity refrigeration
dryer (SCFM)**
Filter
(SCFM)
Drain capacity
per day (gal/liter) Model number Service kit †
3/8 — — 424 6 (22.7) ED3002N115-K SKED3000N115
1 x 1/2, 3/8 141 282 1,413 13 (49.2) ED3004N115-K SKED3000N115
2 x 1/2, 3/8 247 494 2,472 23 (87.1) ED3007N115-K SKED3000N115
2 x 1/2, 3/8 1,059 2,119 10,594 100 (378.5) ED3030N115-K SKED3000N115
2 x 1/2, 3/8 3,532 7,063 35,315 330 (1,249.2) ED3100N115-K SKED3000N115
* Based on 100 PSI working pressure, air compressor inlet at 77°F (25°C) at 60% RH, air discharge temperature od 95°F (35°C) following the aftercooler, pressure
dewpoint of 37°F (2.8°C) after the refrigerated dryer.
** Condensate from aftercooler or refrigerated dryer to be drained upstream – only for residual oil content or small quantities of condensate.
† ____
Note: A 6 ft. line cord will be included with each drain.
Dimensions
ED3100N115-K
ED3030N115-K
ED3007N115-K
ED3004N115-KED3002N115-K
4.33
(110mm)
2.64
(67mm)
5.75
(146mm)
0.35
Dia.
G3/8
0.31
Dia.
3/8
3.98
(101mm)
4.37
(111mm)
2.64
(67mm)
5.47
(139mm)
0.35
Dia.
G3/8
0.31
Dia.
1/2
4.80
(122mm)
2.64
(67mm)
6.14
(156mm)
0.35
Dia.
G3/8
0.31
Dia.
1/2
1/2
1/2
5.39
(137mm)
2.64
(67mm)
6.14
(156mm)
0.35
Dia.
G3/8
0.31
Dia.
1/2
1/2
1/2
7.75
(197mm)
2.64
(67mm)
6.14
(156mm)
0.35
Dia.
G3/8
0.31
Dia.
1/2
1/2
1/2