Specifications

G67
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatics
Flow
Controls
Integrated
Fittings
SensingControl
Panel
G
Accessories
130 & 134 Series
Catalog 0600P-E
Relief Valves - Diaphragm Type
Features
• Compact, Sensitive Diaphragm-type Relief
Valve
• Push-pull, Locking Knob
• Knob and Top Work the Same as a Miniature
Regulator
• 130 has Lightweight Aluminum Construction
• 134 has a brass body, captured exhaust and is
an Inline Type with 3 Inlet Ports and 1 Outlet
Port
Applications
• Designed to Protect Against Excessive Pressure
Buildup in a Pneumatic Circuit or System
• For Use where Gradual Proportional Relief is
Required
Operation
• Turn relief valve knob clockwise for maximum
pressure.
• Set pressure going into relief valve at desired
pressure.
• Turn relief valve knob counter-clockwise until
exhaust starts to bleed.
• Turn relief valve knob clockwise until exhaust stops
bleeding. Push to lock knob.
Ordering Information
Relief
Valve
Spring Range
0-15 PSIG 0-25 PSIG 0-50 PSIG 0-100 PSIG
130
130-02AA
130-02AAP*
130-02A
130-02AP*
130-02B
130-02BP*
130-02C
130-02CP*
134
134-02AA
134-02AAP*
134-02A
134-02AP*
134-02B
134-02BP*
134-02C
134-02CP*
* Panel mount nut included.
Relief Valve Kits
Bonnet Assembly Kit .........................................PCKR364Y
Panel Mount Nut ....................................................PR05X51
Specifications
Relief Range ..............................0 to 100 PSIG (0 to 6.9 bar)
Maximum Inlet Pressure ......................300 PSIG (20.7 bar)
Operating Temperature ........... 40°F to 120°F (4°C to 49°C)
Port Threads:
130 ....................................................... 1/4" Pipe Male Only
134 ............................Inlet Port – Two 1/8" & One 1/4" Pipe
Outlet Port – 1/4" Pipe
Materials of Construction
Adjusting Knob ............................................Polypropylene
Adjusting Screw .......................................Zinc-plated Steel
Body .........................................Aluminum (130); Brass (134)
Diaphragm / Disc ......................................................Buna-N
Nut ..............................................................Chromated Steel
Spring Cage .................................................................Acetal
Spring ..........................................................Zinc-plated Steel
130 Relief Valve
Inlet
Dimensions
130 134
2.44
62mm
.22 Dia.
1/4" Pipe
INLET
3.52
89mm
1.08
27mm
1.44
37mm
1.44
37mm
2.66
67mm
3.00
76mm
.375
9.5mm
1/4" Pipe
INLET
1/8" Pipe
INLET
FRONT & BACK
1/4" Pipe
OUTLET
1.62
41mm
1.62
41mm
FLOW DIRECTION
Inlet
134 Relief Valve