Specifications

G54
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatics
Flow
Controls
Integrated
Fittings
Sensing Control
Panel
G
Integrated Fittings
Blocking Flow Control Valves
Catalog 0600P-E
Features
Blocking valves prevents damage to work and equipment in the
event of a loss of pressure. Blocking valves which are mounted in
pairs on a cylinder lock the piston by simultaneously cutting off the
supply and exhaust. Functional locks are more precise and rapid
when blocking valves are located on the cylinder: the volume of air in
the pipework no longer needs to be taken into consideration.
Applicable Tube
Tube O.D. 1/8, 5/32, 1/4, 3/8
Tube O.D. (mm) 4, 6, 8, 10, 12, 14
Nomenclature
Example:
FC601-4-2
Attribute:
FC Flow control
6 Blocking
0 Brass body
1 Tube x pipe
4 1/4 Tube O.D.
2 1/8 Pipe thread
Specifications
Pressure Range: 15 to 145 PSI
Temperature
Ranges:
-4° to 160°F
Number of Cycles
> 10 million at 68°F
and 1 Hz
Leak Rate: < 3.2 CCM
Working Fluid: Compressed air
Materials of Construction
Body: Treated Brass
Gripping Ring: Stainless Steel
Seals, Diaphragm: Nitrile