Specifications

G44
Parker Hannifin Corporation
Pneumatic Division
Richland, Michigan
www.parker.com/pneumatics
Flow
Controls
Integrated
Fittings
Sensing Control
Panel
G
Integrated Fittings
In-Line Flow Control Valves
Catalog 0600P-E
Features
In-line flow controls are unidirectional flow control valves. Intake
air flows freely through the flow control; exhaust air is metered out
through a specially designed adjustment screw. An arrow on the
body of the valve indicates the direction of controlled flow. They can
be easily added to existing circuitry. Simply splice it into the cylinder
port line.
They can be used individually or they may be stacked together using
two joining clips.
Applicable Tube
Tube O.D.
5/32, 1/4, 5/16, 3/8,
1/2
Tube O.D. (mm) 4, 6, 8, 10, 12
Nomenclature
Example:
FCMS731-5/32-2
Attribute:
FC Flow control
M Miniature
8 In-line
3 Nylon body
2 Tube x pipe
4 1/4 Tube O.D.
Specifications
Pressure Range: 15 to 145 PSI
Temperature
Ranges:
30° to 160°F
Working Fluid: Compressed air
Materials of Construction
Body:
Glass reinforced
nylon 6.6
Gripping Ring: Stainless Steel
Adjustment Screws Nickel-plated brass
Locking Nut: Nickel-plated brass
Tailpiece: Nickel-plated brass