Specifications

ManualsBrandsCentral Pneumatic ManualsPower Tool93253

WARNING

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN

OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.

This document and other infor mation from Parker Hanniﬁn Corporation, its subsidiaries and authorized distributors provide

product and/or system options for further investigation by users h aving technical expertise. It is important that you analyze all

aspects of your application including consequences of any failure, and review the information concerning the product or system

in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the

user, through its own analysis and testing, is solely responsible for making the ﬁnal selection of the products and systems

and assuring that all performance, safety and warning requirements of the application are met.

The products described herein, including without limitation, product features, speciﬁcations, designs, availability and pricing,

are subject to change by Parker Hanniﬁn Corporation and its subsidiaries at any time without notice.

Offer of Sale

The items described in this document are hereby offered for sale by Parker Hanniﬁn Corporation, its subsidiaries or its

authorized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this

document entitled “Offer of Sale”.

Air Preparation Products

Catalog 0600P-E

Warning, Offer of Sale

Parker Hanniﬁn Corporation

Pneumatic Division

Richland, Michigan

www.parker.com/pneumatics

Summary of content (80 pages)

PAGE 1
Air Preparation Products Catalog 0600P-E Warning, Offer of Sale ! WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users h aving technical expertise.
PAGE 2
(Revised 7-12-2013) Click here to view bookmarks.
PAGE 3
Pneumatic Products Catalog 0600P-E Index • Compact & Simplified Design • Subbase or Manifold Option • 3-Way • NO & NC on Same Manifold • Wide Range of Voltage • .033 to .05 Cv www.parker.com/pneu/15mm • Stand Alone Valves • Valve Island • Collective Wiring or Fieldbus Configuration • 3-Way & 4-Way • Modular & Flexible Design • Multiple Pressure Option • Compact & Low Weight • .18 to .80 Cv • Compact Composite Design • Modular with a Wide Range of Voltages • 3-Way & 4-Way • Fieldbus Available • .6 to 1.
PAGE 4
(Revised 8-18-2014) (Revised 03-23-13) Control Panel Products Human / Machine Dialog Section G Basic Features .....................................................G2-G3 Dimensions & Assembly.............................................G8 Push Button, Selector Switches with Bodies.............G4 Legend Plates, Specifications....................................G9 Push Buttons..............................................................G5 Mounting.......................................................
PAGE 5
Catalog 0600P-E Basic Features (Revised 03-23-13) Human / Machine Dialog Pneumatic Push Button & Visual Indicators HUMAN-MACHINE DIALOG requires devices such as push buttons and selector switches to provide command inputs. A wide variety of these devices is available to meet most application needs. Both pneumatic and electrical switch bodies are available to match system technology. All of these devices use the 22 mm (7/8") mounting standard.
PAGE 6
Human / Machine Dialog Pneumatic Push Button & Visual Indicators Catalog 0600P-E Basic Features MODULAR PNEUMATIC / ELECTRIC PUSH BUTTONS As with electrical contact switches, pneumatic valve modules can be mounted on a number of different operating heads. • Pneumatic normally non passing (NNP) is equivalent to electrical normally open (N.O.). PXBB3911 PXBB4932 PXBB4931 • Pneumatic normally passing (NP) is equivalent to electrical normally closed (N.C.).
PAGE 7
Human / Machine Dialog Push Button Bodies Catalog 0600P-E Part Numbers With 3/2 Valve Bodies 5/32" Instant Straight Connections Flush Push Buttons PXBB3111BA2 Selector Switches PXBB4131BA2 Part Number Color PXBB3111BA2 Black Function PXBB3111BD2 Type of Switching* Part Number Color PXBB3111BD2 Black 2 Maintained NNP PXBB3211BD2 Black Positions with NNP+NNP PXBB3251BD2 Black Std. Handle NNP+NP PXBB3211BD3 Black NNP+NNP PXBB3251BD3 Black 3 Maintained Positions with Std.
PAGE 8
Grayed out items are obsolete Catalog 0600P-E (Revised 08-18-14) Part Numbers Human / Machine Dialog Push Buttons For Use With PXBB Valve Bodies and ZBE Electrical Switch Bodies Push Buttons Mushroom Head Push Buttons ZB4BL2 ZB4BP2 ZB4BC2 .38 (10) Flush Spring Return .
PAGE 9
Grayed out items are obsolete Catalog 0600P-E (Revised 08-18-14) Part Numbers Human / Machine Dialog Selector Switches For Use With PXBB Variable Composition Switch Bodies Selector Switches Key Operated Selectors ZB4BJ3 ZB4BD3 .94 1.50 (24) (38) 1.13 (29) 1.06 (27) 1.13 (29) 1.06 (27) Knob Lever Standard Selector .88 (22) 1.
PAGE 10
Human / Machine Dialog Valve Bodies & Accessories Catalog 0600P-E Part Numbers For Use With 22mm (7/8") Metal Operating Heads 5/32" Instant Connections 3/2 Valve Bodies with Mounting Ring Specifications Air Quality – Standard Shop Air, Lubricated or Dry.......... 40 µm Filtration Flow – PXBB3•..................................................................... Cv=.08 PXBB4•..................................................................... Cv=.18 Materials – Body.....................................
PAGE 11
Human / Machine Dialog Dimensions & Assembly Catalog 0600P-E Technical Information PXB-B3 Dimensions 2.01 (51) 1.83 (46.5) .04 to .24 (1 to 6) 1.95 (49.5) ø.89 (22.5) 2.34 (59.5) .04 to .24 (1 to 6) 1.58 Minimum Distance (40) Between Centers PXB-B4 Dimensions 1.18 (30) 1.82 (46.2) Tube Bending Radius For PXBB3 and PXBB4 2.20 (56) 4 mm O.D. x 2 mm I.D. Tube = Minimum 0.39 (10) Radius .04 to .24 (1 to 6) 2.58 (65.5) 4 mm O.D. x 2.7 mm I.D. Tube = Minimum 0.59 (15) Radius .04 to .
PAGE 12
Human / Machine Dialog Legend Plates, Specifications Catalog 0600P-E Part Numbers For Push Buttons and Visual Indicators Legend Plates for PXBB Devices For 22mm Visual Indicators Only (22mm) 2 lines of 11 characters maximum Please indicate the required text when ordering.
PAGE 13
Human / Machine Dialog Mounting Catalog 0600P-E Technical Information Functionality Explanation Fluid Power Function Normally Closed (N.C.) Normally Open (N.O.) Universal Description Symbol 2-Way 3-Way 2-Way 3-Way Electrical Function Normally Non-Passing (NNP) Normally Open (N.O.) Normally Passing (NP) Normally Closed (N.C.) Symbol Type of Switching: Universal 3-Way: Valve can be connected either as NP or NNP as required by connecting the primary air supply to port 1 or port 3.
PAGE 14
Human / Machine Dialog Visual Indicators, 22mm (7/8") Catalog 0600P-E Part Numbers With 5/32" Instant Connections 22mm Visual Indicators Specifications Air Quality – Standard Shop Air, Lubricated or Dry, 40µm Filtration Materials – Body....................................................................... Polyamide Operating Head....................................... Zinc Alloy & Plastic Number of Operations with Dry Air at 90 PSI (6 bar) and 68°F (20°C) - Frequency 1 Hz.................
PAGE 15
Module and Pre-Assembled Enclosure Human / Machine Dialog Two-Hand Controls Features General Characteristics • The pre-assembled two-hand control enclosure occupies both hands of an operator by requiring nearly simultaneous operation of two pushbuttons Operating Pressure........................40 to 120 PSI (3 to 8 bar) • Poppet – snap-acting (no spools) Flow at 90 PSI (6 bar)...................... 7 SCFM (200 l/mn ANR) • Same air as in cylinders – Filtration: 40 micron Operating Temperature.......
PAGE 16
Module and Pre-Assembled Enclosure Human / Machine Dialog Two-Hand Controls Two-Hand Control Module Specifications Catalog 0600P-E (Revised 03-23-13) a S b P PXPA11 Part Number Connections PXPA11 5/32" Instant Dimensions 2x ø.16 (4.2) = = = 2.56 (65) 3.03 (77) Air Quality – Standard Shop Air, Lubricated or Dry, 40µm Filtration Flow at 90 PSI (6 bar) in SCFM (l/mn ANR).............. 7 (200) Materials – Body.......................................................................
PAGE 17
Catalog 0600P-E (Revised 03-23-13) Human / Machine Dialog Notes Flow Controls Integrated Fittings Sensing Control Panel G G14 Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.
PAGE 18
(Revised 12-03-2012) Sensing Pneumatic Control Components Section G Control Panel Sensing Integrated Fittings Flow Controls www.parker.com/pneu/limsen Basic Features – Pneumatic Sensors ...................... G16 Limit Switches 3/2 Miniature Limit Switches.......................... G17-G18 3/2 Compact Limit Switches........................... G19-G20 “K” Series – Standard Duty Limit Switches.... G21-G24 “J” Series – Heavy Duty Limit Switches......... G25-G27 G PWBA Blocking Valves.................
PAGE 19
Sensing Pneumatic Sensors Catalog 0600P-E Basic Features To achieve the sensing or feedback function, pneumatic sensors can be: • Limit Switches in a Variety of Sizes and Configurations • Pressure Switches with Many Adjustable Ranges • Components Designed Specifically for Pneumatic Technology using Pressure Variation, Air Bleed or Blocking for Detection. A wide variety of pneumatic sensors are available to suit any application requirement.
PAGE 20
Part Numbers Sensing 3/2 Miniature Limit Switches Direct Acting Limit Switches Specifications 1/16" I.D. Internal Orifice Air Quality – Standard Shop Air, Lubricated or Dry, 40µm Filtration Catalog 0600P-E Flow SCFM (Nl/min) – PXCM111 ............................................................... 2.2 (60) PXCM121 ............................................................... 3.0 (85) PXCM521 ............................................................ 8.8 (250) PXCM111 Materials – Body...........
PAGE 21
Sensing Specifications & Dimensions Catalog 0600P-E Technical Information Operator Specifications PXCM111 PXCM121 PXCM521 Differential Travel at 90 PSI (6 bar) .006" (0.15 mm) .012" (0.3 mm) .020" (0.5 mm) Maximum Travel (B) at 90 PSIG (6 bar) .055" (1.4 mm) .126" (3.2 mm) .228" (5.8 mm) Minimum Pre-Travel (A) at 90 PSIG (6 bar) .035" (0.9 mm) .079" (2 mm) .087" (2.2 mm) 2.5 lb (11 N) 1.0 lb (4.5 N) 1.
PAGE 22
Sensing 3/2 Compact Limit Switches Catalog 0600P-E Part Numbers Pilot Operated Compact Limit Switches Specifications Air Quality – Standard Shop Air, Lubricated or Dry, 40µm Filtration 5/32" Instant Connections Pipeable Exhaust Port 7/64" I.D. Internal Orifice Flow SCFM (Nl/min)................................................. 8.8 (250) Materials – Body...................................................................... Zinc Alloy Poppets............................................................
PAGE 23
Sensing Specifications & Dimensions Catalog 0600P-E Technical Information Operator Specifications PXCM601A110 PXCM601A102 PXCM601A103 PXCM601A110 + XCMZ24 .012" (0.3 mm) .008" (0.2 mm) .020" (0.5 mm) .047" (1.2 mm) (A) .197" (5 mm) .197" (5 mm) .197" (5 mm) — Minimum Pre-Travel (A) at 90 PSIG (6 bar) .066" (1.7 mm) .066" (1.7 mm) .066" (1.7 mm) .370" (9.4 mm) (A) Minimum Operating Force at 90 PSI (6 bar) 5.4 lbf (24 N) 5.2 lbf (23 N) 5.2 lbf (23) 4.
PAGE 24
Sensing Standard Duty Limit Switches – “K” Series Catalog 0600P-E Assembly Part Numbers Limit Switches Plunger Operated Roller Operated 5/32" Instant Connections Pipeable Exhaust Port 1/8" I.D. Internal Orifice 5/32" Instant Connections Pipeable Exhaust Port 1/8" I.D.
PAGE 25
Sensing Standard Duty Limit Switches – “K” Series Catalog 0600P-E Body & Head Part Numbers Separate Pneumatic Switch Bodies Operating Heads For Use With PXCK Switch Bodies PXCK211 Part Number Actuator PXCK211 ZCKG00 Type of Switching* Part Number Description — Die Cast Zinc Rotary Operated NNP For Use with ZCK Series Operating Heads PXCK221 Actuator ZCKG00 Plunger Operated NP Pneumatic Switch Bodies with Rotary Heads ZCKD02 Roller Plunger ZCKD06 Whisker ZCKD10 Rod Plunger ZCKD21
PAGE 26
Sensing “K” Series Catalog 0600P-E Specifications Specifications Air Quality – Standard Shop Air, Lubricated or Dry, 40µm Filtration Operating Positions........................................... All Positions Flow SCFM (Nl/min)................................................. 7.4 (210) Ports – 5/32" Instant for Semi-Rigid Nylon or Polyurethane Tube Operating Pressure.................... 40 to 115 PSIG (3 to 8 bar) Materials – Body.....................................................................
PAGE 27
Sensing “K” Series Catalog 0600P-E Dimensions Dimensions PXCK21101, PXCK22101 .39 Ø (10) PXCK21102, PXCK22102 2.3 (59) 2.81 (72) 3.7 (94) Ø .16 (4) .51 Ø (13) .63 (16) Ø .79 (20) PXCK21121, PXCK22121 .59 (15) 1.91 (48.5) Ø .79 (20) .31 (8) 3.03 (77) 4.21 (107) Ø .08 Ø (2) 6.52 (166) 7.91 (201) 4.43 (113) .79 (20) PXCK2110031, PXCK2210031 .87 Ø(22) .63 (16) .79 (20) .79 (20) PXCK2110041, PXCK2210041 2.13 (54) 1.5 (38) .24 (6) PXCK21106, PXCK22106 .59 (15) .24 (6) .
PAGE 28
Body & Head Part Numbers Sensing Heavy Duty Limit Switches – “J” Series Switch Bodies Only Switch Bodies with Rotary Head Catalog 0600P-E PXCJ117 PXCJ11701 Part Number Part Number Type of Switching* PXCJ117 NNP PXCJ11701 Right & Left, Spring Return PXCJ127 NP PXCJ11705 Right or Left, Spring Return Type of Direction of Actuation Switching* NNP PXCJ12701 Right & Left, Spring Return NP PXCJ12705 Right or Left, Spring Return Top Plunger & Rotary Operating Heads ZC2JY81 ZC2JY91 ZC2JE70 D
PAGE 29
Sensing “J” Series Catalog 0600P-E Specifications Specifications Air Quality – Standard Shop Air, Lubricated or Dry, 40µm Filtration Number of Operations with Dry Air at 90 PSI (6 bar) and 68°F (20°C) – Frequency 1 Hz................................ 10 Million Flow SCFM (Nl/min)................................................. 7.4 (210) Operating Positions........................................... All Positions Materials – Body......................................................................
PAGE 30
Sensing “J” Series Catalog 0600P-E Dimensions Switch Body With Plunger Heads With ZC2JE61 With ZC2JE62 With ZC2JE70 .77 (19.5) Ø .47 (12) .77 (19.5) .77 (19.5) .16 (4) Ø .47 (12) .08 Ø (2) 6.02 (153) 2.32 (59) 1.85 (47) 7.64 (194) 3.94 (100) 3.46 (88) Switch Body With Rotary Heads and Operating Levers With ZC2JY11 With ZC2JY31 1.61 to 2.72 (41 to 69) .2 (5) Ø .87 (22) With ZC2JY51 1.54 to 2.80 (39 to 71) Ø .87 (22) 2.13 to 2.60 (54 to 66) 4.92 (125) 5.83 max (148) max 1.8 to 3.
PAGE 31
(Revised 12-3-12) Catalog 0600P-E Blocking Valves - Features Sensing Blocking Valves Blocking Valves The blocking valve is a single acting spring return 2/2 valve in a fitting format. The device requires a pneumatic pilot signal to open, which allows free flow of air or neutral gas. As long as a pilot signal is present, the device will remain open. When the pilot signal is removed, the internal spring will close the blocking valve, bubble tight.
PAGE 32
Sensing PWBA Series - Blocking Valves 2/2 Catalog 0600P-E Blocking Valves For Cylinder Mounting (Can also be mounted in Threshold Sensor Banjo) With Instant Tube Fittings BSP Symbol 1/8" 6mm NPT Cylinder Catalog Port Catalog Connection Connection Number Thread Number for Pilot for Tube (Male) 1/8" 1/4" PWBA3468 PWBA1468 1/4" 1/4" 6mm 8mm PWBA1469 PWBA1489 3/8" 3/8" 8mm 10mm PWBA1483 PWBA1493 1/2" 12mm PWBA1412 Cylinder Connection Port Thread Connection for Pilot for Tube (Male) 4mm Tube PW
PAGE 33
Sensing Threshold Sensors Catalog 0600P-E Basic Features General Description Threshold Sensors – PWS The plug-in threshold sensors provide feedback information on pneumatic cylinder status in one of three possible outputs . . . pneumatic, electric, or electronic. Mounted into the cylinder port, these devices monitor the back pressure of the cylinder's exhaust. When the cylinder's piston stops, the back pressure rapidly drops and the threshold sensor provides the desired output.
PAGE 34
Sensing Threshold Sensors Catalog 0600P-E Part Numbers Allen Key Sensor Locking Clip Banjo Socket Black Brown (BK) Blue (BN) (BU) 5/32" Tube Instant Connections PWSM1012 Mounting Port Size Model Number Wrench 10-32 PWSB1557 5/16" Hex 1/8" PWSB1887 3/16" Allen 1/4" PWSB1997 5/16" Allen 3/8" PWSB1337 3/8" Allen 1/2" PWSB1227 1/2" Allen Plug-in Sensors Output Model Number Connection Pneumatic PWSP111 5/32" push-in Electrical PWSM1012 3-wire cable (6 ft) Operation Pneumatic
PAGE 35
Dimensions & Technical Information Sensing Threshold Sensors Dimensions Specifications Catalog 0600P-E Operating Pressure.................... 0 to 150 PSIG (0 to 10 bar) H Temperature Range..................5°F to 140°F (-15°C to 60°C) K ! C A B Caution: If it is possible that the ambient temperature may fall below freezing, the medium must be moisture free to prevent internal damage or unpredictable behavior. L B/2 Banjo Socket Maximum Operating Frequency..................................
PAGE 36
(Revised 05-22-2012) Integrated Fittings Product Index...................................................G34-G35 Compact Flow Control Valves..........................G36-G37 Miniature Flow Control Valves..........................G38-G39 Swivel Outlet Flow Control Valves....................G40-G41 Plug-in Flow Control Valves..............................G42-G43 In-line Flow Control Valves...............................G44-G47 Compact Metal Flow Control Valves.................
PAGE 37
Integrated Fittings Fittings Catalog 0600P-E Product Index FCC731 Meter Out FCCB731 Bi-Directional Flow Control FC731 Meter Out - BSPP FCCB731 Bi-directional Flow Control - BSPP FCKC731 Knobless Meter Out Flow Control Compact Flow Control Valves Page G36 FCKC731 Knobless Flow Control - BSPP FCKCB731 Knobless Bi-directional Flow Control - BSPP Page G37 FCMK731 Knobless Mini Meter Out Flow Control Swivel Outlet Flow Control Valves Plug-In Flow Control Valves Page G43 Flow Controls Integrated Fit
PAGE 38
Integrated Fittings Fittings Catalog 0600P-E Product Index W68PLCKI Male Check Valve Meter In Page G51 68PLCK Male Check Valve Meter Out - BSPP Page G51 3047 Series Check Valve Blocking Flow Control Valves 68PLCKI Male Check Valve Meter In - BSPP VC Check Valve Page G51 FC601 Push-to-Connect Lock Out Valves Page G51 FC601 Push-to-Connect Lock-Out Valve BSPP Page G55 Page G52 PSBJ731 Pneumatic - 5/32 Pilot 339 Series Check Valve Page G55 PSPJ731 Pneumatic - 10-32 Pilot PSBJ731 Pneumatic -
PAGE 39
Integrated Fittings Compact Flow Control Valves Catalog 0600P-E Features Materials Of Construction Body (Depending upon the Model): • Glass reinforced nylon 6.6 • Brass Gripping Ring: Stainless Steel Adjustment Screws Nickel-plated brass Locking Nut: Nickel-plated brass Base: Nickel-plated brass Nomenclature Example:FCC731-4-2 FC Attribute: Flow control C Compact 7 Right angle 3 Nylon body 1 Tube x Pipe 4 1/4 Tube O.D.
PAGE 40
Integrated Fittings Compact Flow Control Valves Catalog 0600P-E Part Numbers L Hex 1 Hex 1 H ØD H L Hex 2 FCCB731 Compact Bi-Directional Flow Control Part No. Tube Size (In) FCCB731-5/32-2 FCCB731-4-2 FCCB731-4-4 NPT Hex 1 (In) Hex 2 (In) H Open H Closed L 5/32 1/8 0.63 0.39 1.67 1.44 0.85 1/4 1/8 0.63 0.39 1.67 1.44 0.85 1/4 1/4 0.63 0.39 1.67 1.44 FCKC731 Knobless Compact Flow Control - BSPP Part No. 0.
PAGE 41
Integrated Fittings Miniature Flow Control Valves Catalog 0600P-E Features Materials of Construction Body (Depending upon the Model): • Glass reinforced nylon 6.6 • Brass Gripping Ring: Stainless Steel Adjustment Screws Nickel-plated brass Locking Nut: Nickel-plated brass Base: Nickel-plated brass Nomenclature Example: FCM731-4-2 Attribute: FC Flow control M Miniature 7 Right angle 3 Nylon body 1 Tube x pipe 4 1/4 Tube O.D. 2 1/8 Pipe thread Applicable Tube Tube O.D.
PAGE 42
Integrated Fittings Miniature Flow Control Valves Catalog 0600P-E Part Numbers Hex 1 Hex 1 H H L L FCM731 Miniature Meter Out Flow Control Part No. FCM731-2-0 Tube Size (In) 1/8 NPT Hex 1 mm H Open H Closed L 10-32 6 1.14 0.91 0.67 FCMK731 Knobless Mini Meter Out Flow Control Part No. Tube Size (In) NPT Hex 1 mm H Open H Closed L 0.65 FCM731-2-2 1/8 1/8 7 1.41 1.26 0.69 FCMK731-2-0 1/8 10-32 6 0.79 0.65 FCM731-5/32-0 5/32 10-32 6 1.02 0.93 0.
PAGE 43
Integrated Fittings Swivel Outlet Flow Control Valves Catalog 0600P-E Features Materials of Construction Body: Glass reinforced nylon 6.6 Gripping Ring: Stainless Steel Adjustment Screws Nickel-plated brass Locking Nut: Nickel-plated brass Base: Nickel-plated brass Nomenclature Example: FCMs731-5/32-2 Attribute: FC Flow control M Miniature s Swivel outlet 7 Right angle 3 Nylon body 1 Tube x pipe 5/32 5/32 Tube O.D. 2 1/8 Pipe thread Applicable Tube Tube O.D.
PAGE 44
Integrated Fittings Swivel Outlet Flow Control Valves Catalog 0600P-E Part Numbers L Hex 2 L Hex 2 H1 H1 H min/ max H L1 Hex 1 L1 Hex 1 FCCS731 Compact Swivel Outlet - BSPP FCCS731 Compact Swivel Outlet Flow Control Part No. Tube Size (In) NPT Hex 1 mm FCCS731-4-2 1/4 1/8 19 Hex 2 H H mm Closed Open 10 1.87 2.09 H1 L L1 0.63 0.93 0.65 Part No. Tube Hex 1 Hex 2 H H Size BSPP mm mm Closed Open (mm) H1 L L1 FCcS731-6M-2G 6 1/8 16 10 38.0 44.0 16.0 23.5 18.
PAGE 45
Integrated Fittings Plug-In Flow Control Valves Catalog 0600P-E Features Materials of Construction Body: Glass reinforced nylon 6.6 Gripping Ring: Stainless Steel Adjustment Screws Nickel-plated brass Locking Nut: Nickel-plated brass Tailpiece: Nickel-plated brass Nomenclature Example: FCMs731-5/32-2 Attribute: FC Flow control M Miniature 7 Right angle 3 Nylon body 1 Tube x pipe 4 1/4 Tube O.D. 2 1/8 Pipe thread Applicable Tube Tube O.D. 1/8, 5/32, 1/4 Tube O.D.
PAGE 46
Integrated Fittings Plug-In Flow Control Valves Catalog 0600P-E Part Numbers Hex 1 H H1 ØD H2 L FCMSP731 Plug-In Mini Flow Control Part No. Tube Size (In) Hex 1 mm H Open H Closed H1 H2 L FCMSP731-2 1/8 6 1.04 0.94 0.12 0.59 0.67 FCMSP731-5/32 5/32 6 1.10 1.00 0.37 0.61 0.67 FCMSP731-4 1/4 7 1.18 1.08 0.12 0.73 0.73 Hex 1 H H1 ØD H2 L FCMSP701 - Plug-In Miniature Flow Control Tube Size (mm) Hex 1 mm H Closed H Open H1 H2 L 4 6 25.5 28.0 9.5 15.5 17.
PAGE 47
Integrated Fittings In-Line Flow Control Valves Catalog 0600P-E Features Materials of Construction Body: Glass reinforced nylon 6.6 Gripping Ring: Stainless Steel Adjustment Screws Nickel-plated brass Locking Nut: Nickel-plated brass Tailpiece: Nickel-plated brass Nomenclature Example: FCMs731-5/32-2 Attribute: FC Flow control M Miniature 8 In-line 3 Nylon body 2 Tube x pipe 4 1/4 Tube O.D. Applicable Tube Tube O.D. 5/32, 1/4, 5/16, 3/8, 1/2 Tube O.D.
PAGE 48
Integrated Fittings In-Line Flow Control Valves Catalog 0600P-E Part Numbers L L1 L L1 Hex 1 H Hex 1 H N2 N2 K K K K K K N1 N1 ØT FCB832 In-Line Bi-directional Flow Control FC832 In-Line Flow Control Part No. Tube Hex 1 H H Size mm Closed Open (In) K ØT L L1 N1 N2 T Part No. Tube Hex 1 H H Size mm Closed Open (mm) K L L1 N1 N2 T FC832-5/32 5/32 5 1.15 1.31 0.47 1.52 0.59 0.31 0.43 0.09 FCB832-4M 4 5 29.5 33.5 12.0 39.0 15.0 8.0 11.0 2.
PAGE 49
Integrated Fittings In-Line Flow Control Valves Catalog 0600P-E Part Numbers B DIA. L L1 Hex 2 H min/max O-ring for friction 1 ØJ A C N1 338 Bi-directional Flow Control Valves Hex 1 FC836 Threaded In-Line Flow Control - BSPP FC836-2G 1/8 13 8 39.5 FC836-4G 1/4 16 11 FC836-6G 3/8 19 FC836-8G 1/2 24 Hex 1 Hex 2 H H (mm) (mm) Closed Open H1 - OPEN H2 - CLOSED T K BSPP 9 A N2 Part No. 0 1 Part No. Port Size 00338 1100 00338 1101 A B C H1 H2 1/8" 9/16" 0.75 1.
PAGE 50
Integrated Fittings In-Line Flow Control Valves Catalog 0600P-E Part Numbers F B (Closed) D FULL C ADJ FLOW FLOW A E 3250 Flow Control Valves - BSPP Part No. Port Size A B C D E F 3250G0119 1/8" 1.75 1.56 0.37 0.62 0.81 0.68 3250G0219 1/4" 2.33 1.97 0.44 0.75 1.09 0.94 3250G0319 3/8" 2.66 2.44 0.56 1.00 1.38 1.19 3250G0419 1/2" 3.11 3.06 0.75 1.25 1.63 1.38 3250G0519 3/4" 3.56 3.69 0.88 1.50 2.00 1.
PAGE 51
Integrated Fittings Compact Metal Flow Control Valves Catalog 0600P-E Features Materials of Construction Body: Treated Brass Gripping Ring: Stainless Steel Adjustment Screws Nickel-plated brass Locking Nut: Nickel-plated brass Tailpiece: Nickel-plated brass Nomenclature Example: FCMs731-5/32-2 Attribute: FC Flow control 7 Right angle 0 Brass body 1 Tube x pipe 4 1/4 Tube O.D. 2 1/8 Pipe thread Applicable Tube Tube O.D. 1/8, 5/32, 1/4, 3/8 Tube O.D.
PAGE 52
Integrated Fittings Compact Metal Flow Control Valves Catalog 0600P-E Part Numbers Hex 1 C A Open Free Flow H Hex 2 B B1 L Metered Flow Shown with Threaded Inlet Model Number FC701 Push-to-Connect Metal Flow Control BSPP Shown with Prestolok Inlet Fitting Thread (NPT) Male Thread (NPT) Female Weight A mm Tube Size (mm) Part No. B mm C mm kg. Cv Adjusted Flow Free Flow 03251 0125 1/8 1/8 44 30 17 0.9 0.26 0.20 03251 0250 1/4 1/4 51 36 23 2.0 0.75 0.
PAGE 53
Integrated Fittings Flow Control Check Valves Catalog 0600P-E Features Materials of Construction Body: • 32PLCK: Nylon/nickel plated brass • 68PLCK: Nylon body with nickel-plated brass base • VC: Acetal Gripping Ring: Stainless Steel O-Ring: • Nitrile (32PLCK & 68PLCK) • EPDM (VC) Nomenclature Example: W68PLCK-4-2 Attribute: W White thread sealant 68 Tube x Pipe PL Prestolok CK Check Valve 4 1/4 Tube O.D.
PAGE 54
Integrated Fittings Flow Control Check Valves Catalog 0600P-E Part Numbers H Hex L 32PLCK In-Line Check Valve Part No. 68PLCK Male Check Valve Meter Out - BSPP Tube Size (In) L 32PLCK-5/32 5/32 1.52 32PLCK-4 1/4 1.61 32PLCK-5 5/16 2.03 32PLCK-6 3/8 2.50 Part No. Tube Size (mm) BSPP 68PLCK-4M-M5 4 68PLCK-4M-2G 4 68PLCK-6M-2G Hex 1 (mm) H M5x0.8 9 32.0 1/8 16 28.5 6 1/8 16 30.5 68PLCK-6M-4G 6 1/4 16 30.5 68PLCK-8M-2G 8 1/8 19 36.
PAGE 55
Integrated Fittings Flow Control Check Valves Catalog 0600P-E Part Numbers B A B 339 Check Valve Part No. Port Size A B 00339 3000 1/8" 1.22 0.56 00339 3001 1/4" 1.34 0.69 00339 3002 3/8" 2.00 0.88 00339 3003 1/2" 2.56 1.19 00339 3004 3/4" 2.66 1.38 B A B 339 Check Valve - BSPP Part No. Port Size A B 00339G3000 1/8" 1.22 0.56 00339G3001 1/4" 1.34 0.69 00339G3002 3/8" 2.00 0.88 00339G3003 1/2" 2.56 1.19 00339G3004 3/4" 2.66 1.
PAGE 56
Catalog 0600P-E Integrated Fittings Control Panel Sensing Integrated Fittings Flow Controls Notes G G53 Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.
PAGE 57
Integrated Fittings Blocking Flow Control Valves Catalog 0600P-E Features Materials of Construction Body: Treated Brass Gripping Ring: Stainless Steel Seals, Diaphragm: Nitrile Nomenclature Example: FC601-4-2 FC Attribute: Flow control 6 Blocking 0 Brass body 1 Tube x pipe 4 1/4 Tube O.D. 2 1/8 Pipe thread Applicable Tube Tube O.D. 1/8, 5/32, 1/4, 3/8 Tube O.D.
PAGE 58
Integrated Fittings Blocking Flow Control Valves Catalog 0600P-E Part Numbers 10-32 L H1 H 2 H1 H H2 H2 L FC601 Push-to-Connect Lockout Valves FC602 Threaded Port Lockout Valves Part No. Tube Size (in) NPT Hex (mm) H H1 H2 L FC601-4-2 1/4 1/8 21 2.03 1.24 0.79 1.10 FC602-2 1/4 1/8 21 2.03 1.24 0.79 1.04 1/4 1/4 21 2.03 1.24 0.79 1.04 Part No. 1 NPT 2 NPT Hex (mm) H H1 H2 L FC601-4-4 1/4 1/4 21 2.03 1.24 0.79 1.
PAGE 59
Integrated Fittings Threshold Sensor Catalog 0600P-E Features Specifications: Models PSBJ, PSPJ Working Temperature: 5° to 140°F Working Pressure: 45 to 115 PSI Breaking Pressure: 8.5 PSI Response Time: 3 Ms Specifications: Model PSPE Working Pressure: 45 to 115 PSI Breaking Pressure: 7 PSI Current Rating: 5A / 250VAC 5W / 48VDC UL Listed Component Reset Pressure: 10 PSI The sensor fitting detects the absence of pressure and translates it to a high pressure pneumatic output.
PAGE 60
Integrated Fittings Threshold Sensor Catalog 0600P-E Part Numbers Hex 1 øM5 Hex 1 H H 10,5 L L PSBJ731 Pneumatic Threshold Sensor 5/32 Pilot Part No. NPT / UNF Hex (mm) PSBJ708 Pneumatic Threshold Sensor M5 Pilot H L Part No. BSPP Hex 1 (mm) H L PSBJ731-0 10-32 5/16 0.62 1.70 PSBJ708-2G 1/8 14 23 40.5 PSBJ731-2 1/8 9/16 0.90 1.74 PSBJ708-4G 1/4 17 28 42.5 PSBJ731-4 1/4 5/8 1.09 1.81 PSBJ731-6 3/8 7/8 1.13 1.91 PSBJ731-8 1/2 1 1.17 2.
PAGE 61
Catalog 0600P-E Integrated Fittings Notes Flow Controls Integrated Fittings Sensing Control Panel G G58 Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.
PAGE 62
(Revised 10-07-2013) Accessories Section G Tank Valves & Air Chucks.........................................G60 EM Series Exhaust Mufflers.....................................G61 Muffler / Flow Controls.............................................G61 Breather Vents..........................................................G62 ES Series Silencer...................................................G62 ASN Air Line Silencer...............................................G63 P6M Air Line Silencer ...............
PAGE 63
Features & Part Numbers Accessories Tank Valves & Air Chucks Tank Valves Air Chucks For tanks, steel barrels, compressors and other pneumatic containers where a dependable automatic air valve is needed. Equipped with standard valve core and sealing cap. Maximum operating pressure is 185 PSIG. Temperature range is -40°F to 220°F. For regular airlines. Model No. 09166 0060 Model No. 05499 0000 Has a 1/8" pipe thread at bottom for minimum protrusion. N/P finish, dome shaped cap. Packed 25 to a box.
PAGE 64
Catalog 0600P-E (Revised 04-05-12) Muffler / Filters, Muffler / Flow Controls EM Series – Sintered Bronze Muffler / Filters Accessories EM Series & Muffler / Flow Controls General Description Muffler / filters effectively reduce air exhaust noises to an industry accepted level with minimum flow restriction. They protect valves, impact wrenches, screw drivers and other air tools by preventing dirt and other foreign matter from entering the system. Non-corrosive. Can be cleaned with many common solvents.
PAGE 65
Breather Vents, Silencers Accessories Breather Vents & ES Series Breather Vents Specifications Catalog 0600P-E Maximum Operating Pressure.......................150 PSIG (Air) Operating Temperature..................................... 0° to 300°F* * Ambient temperatures below freezing require moisture-free air. Ambient temperatures below freezing and above 180° require lubricants especially selected for suitability at these temperatures. Pneumatic valves should be used with filtered and lubricated air.
PAGE 66
Accessories ASN Series – M5, 1/8", 1/4", 3/8" & 1/2" Catalog 0600P-E Air Line Silencer – Plastic A B Features • Compact • Lightweight • Easy to Install Part Number NPT Thread A Size (mm) BSPT AS-5 • NPT and BSPT Threads Available Maximum Flow (SCFM) 100 PSIG Inlet Sound Pressure Level (dBA) 20 PSIG 100 PSIG Inlet Inlet M5 0.43 (11) 0.32 (8) 15 69 79 • Excellent Noise Reduction • Protects Components from Contamination B (mm) ASN-6 AS-6 1/8" 1.57 (40) 0.
PAGE 67
Accessories P6M Series – G Threads Catalog 0600P-E Air Line Silencer – Plastic B A C Features Part Number Port Thread A Diameter B C Weight (grams) • High Noise Level Reduction P6M-PAC5 M5 0.91 (23) 0.26 (6,5) 0.16 (4) 0.01 • Low Back Pressure Generation P6M-PAB1 G1/8 1.14 (29) 0.55 (14) 0.24 (6) 0.02 P6M-PAB2 G1/4 1.34 (34) 0.67 (17) 0.24 (6) 0.04 P6M-PAB3 G3/8 2.36 (60) 0.98 (25) 0.35 (9) 0.06 P6M-PAB4 G1/2 2.52 (64) 0.98 (25) 0.43 (11) 0.10 P6M-PAB6 G3/4 5.
PAGE 68
Accessories ECS Series – 1/2" & 1" Catalog 0600P-E Air Line Muffler – Reclassifier Operation B Compressor oils and lubricating oils are exhausted from valves, cylinders and air motors into the ECS. Oil aerosols are “coalesced” into larger droplets and gravity pulls them into the attached drain sump. The sump can then be drained manually or by using a 1/4" ID plastic tube drain.
PAGE 69
Automatic Drip Leg Drain, Relief Valve Accessories Features & Operation Automatic Drip Leg Drain Relief Valve (Revised 10-07-13) Catalog 0600P-E A A B B F C C A B C 2.50 2.37 0.87 64 mm 60 mm 22 mm B 0.75 Hex 1.88 - 2.25 19 mm 47.8 - 57.2 mm Features Features • Auto Drain Ported 1/8" to Pipe Away Liquid. • Large Relief Capacity (70.
PAGE 70
Relief Valves - Diaphragm Type Accessories 130 & 134 Series 130 Relief Valve 134 Relief Valve Catalog 0600P-E Inlet Inlet Dimensions Features • Compact, Sensitive Diaphragm-type Relief Valve 1.62 41mm 1.44 37mm • Push-pull, Locking Knob 1.44 37mm 1.
PAGE 71
Accessories 0R Series – 1/8" thru 3/4" Ports Catalog 0600P-E Quick Exhaust & Shuttle Valves Valve Specifications 1 Operating Pressure (Air) Maximum: 150 PSIG 200 PSIG for Model No. 0R37TB (PTFE diaphragm) 2 Operating Temperature: Urethane: 0°F to 180°F* (-18°C to 80°C) Nitrile: 0°F to 180°F* (-18°C to 80°C) Fluorocarbon: 0°F to 400°F* (-18°C to 205°C) PTFE: 0°F to 500°F* (-18°C to 260°C) 3 1 A 2 Port 1 (In) C 3 Minimum: 3 PSIG 50 PSIG for Model No.
PAGE 72
Accessories 1/8" to 3/8" Ports Catalog 0600P-E Shuttle Valve General Information 1 Shuttle valves determine a single pneumatic output from two separate inputs. If pressure is applied to both ports simultaneously, the valve will select the port with the higher pressure. 2 3 Valve Specifications Maximum Operating Pressure..............200 PSIG Maximum 3 PSIG Minimum: Differential Pressure A A1 C Operating Temperature......................................
PAGE 73
Accessories Typical Applications Catalog 0600P-E Quick Exhaust & Shuttle Valve Typical “Quick Exhaust Valve” Applications Pressure Man Pressure A Reg B Pressure Rapid Retraction – Double Acting Cylinder Dual Pressure Actuation of Double Acting Cylinder Bi-Directional Control of Two Double Acting Cylinders In this circuit, air is exhausted through a Quick Exhaust Valve that is close coupled to the cap end of the cylinder.
PAGE 74
(Revised 09-25-12) Catalog 0600P-E Pressure Switch Accessories PPS1 Series Pressure Switch – PPS1 3 (Normally Open) ➤ ➤ ➤ 1 (Common) Top View DIN 2 (Normally Closed) 3 1.50 (38.1) 2 1 GND Wire Configuration Pin 1 - Common (Black) Pin 2 - N.C. (Blue) Pin 3 - N.O. (Red) 1.20 Ø (30.5) Pin Configuration Pin 1 - Common (Black) Pin 2 - N.C. (Blue) Pin 3 - N.O. (Red) 2.50 Max. (63.5) 18” Leads 2.30 Max. (58.
PAGE 75
Accessories WDV3 Series Catalog 0600P-E Automatic Electrical Drain Valve Specifications Operating Pressure................................ 230 PSIG (15,9 bar) Ambient Operating Range Temperature: 34° to 130°F (1.1° to 54°C) Coil Insulation Class H........................................................340°F (171.1°C) Voltages AC.................................................................115, 230/50-60 Timer: Open Time..................................... .5 to 10 sec., Adjustable Cycle Time...
PAGE 76
Accessories ED Series Catalog 0600P-E Zero Loss Condensate Drain Zero air loss condensate drains are designed for economical removal of unwanted water, oil emulsions, and other liquids. These drains will only open when liquid is present and will not allow any compressed air to escape from the system. Operating Information Maximum pressure 232 PSIG (16 bar) Ambient operating temperature 35°F to 140°F (1.
PAGE 77
Catalog 0600P-E Accessories Notes Flow Controls Integrated Fittings Sensing Control Panel G G74 Parker Hannifin Corporation Pneumatic Division Richland, Michigan www.parker.
PAGE 78
Catalog 0600P-E Safety Guide Pneumatic Products Warnings Safety Guide For Selecting And Using Pneumatic Division Products And Related Accessories ! WARNING: FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF PNEUMATIC DIVISION PRODUCTS, ASSEMBLIES OR RELATED ITEMS (“PRODUCTS”) CAN CAUSE DEATH, PERSONAL INJURY, AND PROPERTY DAMAGE.
PAGE 79
Catalog 0600P-E Safety Guide Pneumatic Products Warnings 2.7. Chemical Compatibility: For more information on plastic component chemical compatibility see Pneumatic Division technical bulletins Tec-3, Tec-4, and Tec-5 2.8. Product Rupture: Product rupture can cause death, serious personal injury, and property damage. • Do not connect pressure regulators or other Pneumatic Division products to bottled gas cylinders.
PAGE 80
Pneumatic Products Catalog 0600P-E Offer of Sale The goods, services or work (referred to as the “Products”) offered by Parker-Hannifin Corporation, its subsidiaries, groups, divisions, and authorized distributors (“Seller”) are offered for sale at prices indicated in the offer, or as may be established by Seller.