Specifications

Page 4SKU 94605 For technical questions, please call 1-800-444-3353.
15. Do not operate tool if under the influence of alcohol or drugs. Read
warning labels if taking prescription medicine to determine if your judg-
ment or reflexes are impaired while taking drugs. If there is any doubt,
do not operate the tool.
16. Make sure the place where you use this product is properly ventilated.
17. The brass components of this product contain lead, a chemical known
to the State of California to cause birth defects (or other reproductive
harm). (California Health & Safety code § 25249.5, et seq.)
18. Verify paint containers are securely closed before shaking.
19. Maintenance. For your safety, service and maintenance should be per-
formed regularly by a qualified technician.
20. Verify the air pressure from compressor is between 40 and 70 PSI .
21. Follow the warnings and precautions in the manual for the air compres-
sor being used.
The warnings, cautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must
be understood by the operator that common sense and caution are factors
which cannot be built into this product, but must be supplied by the operator.
UNPACKING
When unpacking, check to make sure that all the parts of the Pneumatic Paint
Shaker are included. Refer to the Assembly Drawing and Parts List at the end
of this manual. If any parts are missing or broken, please call Harbor Freight
Tools at the number on the cover of this manual.
INSTALLATION
1. Choose a workbench to mount the Paint Shaker on that is able to with-
stand the weight of the tool, full paint can, and steady vibration of the
mixing.
2. Locate the Paint Shaker on the workbench and mark drilling holes us-
ing the Base (1) mounting holes as a template.
Caution: Before drilling, verify that there are no obstructions or live wires be-
neath the table.