Specifications

Page 10 For technical questions, please call 1-800-444-3353. Air Cutter
9. To prevent accidents, turn off the tool, detach
the air supply, safely discharge any residual
air pressure in the tool, and release the throttle
after use. Clean external surfaces of the tool with
clean, dry cloth, and apply a thin coat of tool oil.
Then store the tool indoors out of children’s reach.
User-Maintenance Instructions
Procedures not specically explained
in this manual must be performed
only by a qualied technician.
TO PREVENT SERIOUS INJURY FROM
ACCIDENTAL OPERATION:
Turn off the tool, detach the air supply, safely
discharge any residual air pressure in the tool,
and release the throttle before performing any
inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY
FROM TOOL FAILURE:
Do not use damaged equipment.
If abnormal noise, vibration, or leaking air occurs,
have the problem corrected before further use.
TO PREVENT SEROUS INJURY
FROM EXPLOSION:
Lubricate the tool only with
specied lubricants. Lubricate the air inlet
using only pneumatic tool oil.
Other lubricants may damage the mechanism and
may be highly ammable, causing an explosion.
Cleaning, Maintenance,
and Lubrication
Note: These procedures are in addition to the
regular checks and maintenance explained as part
of the regular operation of the air-operated tool.
1. Daily - Air Supply Maintenance:
Every day, perform maintenance on the air supply
according to the component manufacturers’
instructions. The lubricator’s oil level needs to be
maintained and the moisture lter must be regularly
drained. Performing routine maintenance on
the air supply will allow the tool to operate more
safely and will also reduce wear on the tool.
2. If the vanes need replacement, all vanes
should be replaced as a set.