® HOTDOG COMPRESSOR 4 GALLON - 2 HP Model 45214 ASSEMBLY and OPERATING INSTRUCTIONS ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright © 2001 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Specifications Motor Power Electrical NPT Air Outlet Air Tank Size Maximum PSI Pressure Range Air Delivery (cfm) Pressure Disconnect Pump Stage Oil Requirement 2 HP, 3450 rpm 120V, 12 amps, 1400 watts, Single Phase, 60 Hz 1/4” NPT 3.5 Gallon 125 psi Pressure Switch on at 80 psi, off at 110 psi 5 @ 40 psi / 4.5 @ 70 psi / 3.8 @ 90 psi / 3.0 @ 110 psi Automatic at 170 psi Single Standard non-detegent, 30 weight compressor or motor oil Optimal capacity for oil tank is 7.8 ounces.
7. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair. 8. Use eye and ear protection. Always wear ANSI approved impact safety goggles. Wear a full face shield if you are producing metal filings or wood chips.
damage to the tool. This tool requires use of an extension cord of 0 to 10 amps capability (up to 50 feet), with wire size rated at 18 AWG. Longer extension cords require larger size wire. If you are using the tool outdoors, use an extension cord rated for outdoor use. (signified by “WA” on the jacket). 20. Maintenance. For your safety, maintenance should be performed regularly by a qualified technician. 21. Only use compressor with air. Never use with any other type of gas. 22. Powerful airstream.
Operation Warning!! Never attempt to adjust or remove Valve Air Outlet (#A-9). It is pre-set at 170 psi. Removal of valve voids warranty. Warning!! Before using your compressor for the first time, fill with oil. Running the compressor with low, or no oil, voids the warranty. 1. Carefully and slowly unscrew the Oil Dipstick (#B-19) from the oil reservoir. The assembly is made of plastic and will break if you are too forceful. 2. Check that oil reaches the full mark on the Oil Dipstick (#B-19).
Operation (continued) Operational Warnings: 1. To reduce the risk of explosion or fire, never spray flammable liquids in a confined area. Make sure the work area is well ventilated. Never smoke while spraying. Never spray near flames or sparks. Keep compressor away from all flammable objects. 2. Air from a compressor is not suitable for breathing purposes. Never inhale air from the compressor. 3. Never alter or weld on the air compressor tank.
Parts List 1 Part No. A-1 A-2 A-3 A-4 A-5 A-6 A-7 A-8 A-9 A-10 A-11 A-12 A-13 A-14 A-15 A-16 A-17 Description Wheel Pin One Way Valve Safety Valve Ring Water Valve Pressure Guage Non-return valve PVC Tube Valve Air Outlet Air Pressure Switch Cord and Plug Pipe Nut Bolt Tank and Handle Rubber Foot Axle Qty. 2 2 1 1 1 1 1 1 1 1 1 1 2 2 1 2 1 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY.
Parts List 2 Part No. B-1 B-2 B-3 B-4 B-5 B-6 B-7 B-8 B-9 B-10 B-11 B-12 B-13 B-14 B-15 B-16 B-17 B-18 B-19 B-20 SKU 45214 Description Qty. Bolt 4 Screw 2 Washer 2 Air Filter 1 Cylinder Head 1 Gasket 1 Valve Seat 1 Gasket 1 Valve Plate 1 Valve Seat 1 Gasket 1 Cylinder 1 Gasket 1 Compression Ring 2 Oil Ring 1 Piston 1 Piston Pin 1 Crankshaft Retainer 2 Dipstick 1 Screw 1 Part No.
Assembly Drawing 1 SKU 45214 Page 9
Assembly Drawing 2 SKU 45214 Page 10 REV 11/01 REV 02/04
