Specifications

PAGE 62
www.padprintmachinery.com
Plate Exposure Units
BR35M
Intro to Exposure Units
An exposure unit combined with a developer kit is an
etching system for both alcohol and water wash polymer
plates.
Owning an exposure unit is not essential for everyone.
Those who need just a few plates in a year can use our
art department and plate-making services.
A cost analysis can determine if your needs merit bringing
plate making in-house. Likewise, if you need frequent,
short turnaround times, you may want to etch your own
plates.
Portable Units
Portable units have a programmable timer, built-in vacuum, and a safety switch that en-
able lamps to be turned on only if the machine is closed. Available in 110 and/or 220V.
We offer two suitcase models:
#BR35M (pictured) – will accommodate plates up to 280 x 370mm, uses four 20- watt
Sunlamp bulbs, weighs 26 lbs. and measures 500mm x 450mm x 450mm when fully
opened.
#BR50M – will accommodate plates up to 350 x 500mm, uses six 20-watt UV bulbs,
weighs 66 lbs. and measures 750mm x 600mm x 600mm when fully opened.
Photo Exposure Kits
To get you started quickly developing your own plates - kit
includes: Quart tray, developer, magnet sheet, scrub brush, line
screen and laser lm positive.
Stand-Alone Units
These semi-automatic stand-alone units have vacuum pumps for
UV exposure, are thermostat controlled, have a stainless steel
developing tank with rotating magnetic planes and a warm air
dryer. All functions are independently controlled by a micropro-
cessor, allowing operator to set it and walk away.
#BR35SV – will accommodate plates up to 250 x 350mm, uses
six 20-watt UV bulbs, has a 15 liter tank capacity and measures
500mm x 500mm x 1000mm.
#BR50SV (pictured) – will accommodate plates up to 350 x
600mm, uses six 40-watt UV bulbs,
has a 20 liter tank capacity and measures 710mm x 600mm x
1000mm.
#BR70SV – will accommodate plates up to 500 x 700mm, uses
eleven 40-watt UV bulbs, has a 50 liter tank
capacity and measures 1050mm x 950mm x 1050mm.
BR50SV