user manual

Page 5SKU 95583
For technical questions, please call 1-800-444-3353.
OPERATION
Attach the Air Inflator to compressor and turn the air compressor on.
Press down on the Quick Release Clamp (see Figure 1) and slide the Hose fully
onto the valve stem.
Grip the Tire Inflator firmly and gently squeeze the Trigger (see Figure 1).
Continue to press down on the Trigger until the Dial Gauge is at the desired PSI.
Release the Trigger.
Press down on the Quick Release Clamp and quickly pull the Hose off of the valve
stem. Shut off air compressor and release any built-up pressure from Inflator.
Quick Release
Lever
Trigger
Dial Gauge
Figure 1
MAINTENANCE
Make sure your Tire Inflator is disconnected from the air hose before attempting any
maintenance. BEFORE EACH USE, inspect the general condition of the tool. Check
for loose screws, misalignment or binding of moving parts, cracked or broken parts,
damaged electrical wiring, and any other condition that may affect its safe operation.
If abnormal noise or vibration occurs, have the problem corrected before further use.
Do not use damaged equipment.
Wipe the Tire Inflator down with a lint free cloth after each use.
Make sure the air hose outlet is clear of dirt or debris. If possible, spray it with com-
pressed air before each use.
PARTS LIST
There are no replacement parts for Tire Inflator with Pressure Gauge.
1.
2.
3.
4.
5.
1.
2.
3.