Specifications

MODEL NOS. 1137-A

1137-A-Q 81137-A

CENTERSET

LAVATORY FITTING

01-21-09

Brecksville, Ohio 44141

Phone: (216) 883-0220 Fax: (440) 526-5745

www.CentralBrass.com

Central Brass

C O M P A N Y

Installation

Drawing

The lavatory centerset is designed with a solid cast brass body

with shanks located on 4-inch centers for supply connections

and mounting. The stems are all brass, with a double O-Ring

seal and rubber seat washer (for compression stems) or ce-

ramic sealing discs (for ceramic units). The canopy handles

are zinc die cast with a chrome plated nish. The faucet body

is polished and copper, nickel and chrome plated. The faucet

is tted with a water saving aerator that limits the ow rate.

O-Ring Compression 1/4-Turn Compression Ceramic Units

1137-A 1137-A-Q 81137-A

Flow Rate: 2.0 GPM @ 60 psi

ADA Compliant

Meets ASME A112.18.1M

ANSI/NSF 61/Section 9 Certied

PAGE 1
Central Brass MODEL NOS. 1137-A 1137-A-Q 81137-A CENTERSET LAVATORY FITTING C O M P A N Y Brecksville, Ohio 44141 Phone: (216) 883-0220 Fax: (440) 526-5745 www.CentralBrass.com O-Ring Compression 1137-A 1/4-Turn Compression 1137-A-Q Ceramic Units 81137-A The lavatory centerset is designed with a solid cast brass body with shanks located on 4-inch centers for supply connections and mounting.
PAGE 2
Central Brass MODEL NOS. 1137-A 1137-A-Q 81137-A CENTERSET LAVATORY FITTING C O M P A N Y Brecksville, Ohio 44141 Phone: (216) 883-0220 Fax: (440) 526-5745 www.CentralBrass.com Handle variations available Faucets with lever, wrist or elbow handles with compression or ceramic stem cartridges are ADA compliant.