Specifications

MODEL NO. 0048-TA4
SINK FIXTURE
ADA COMPLIANT
06-25-08
Brecksville, Ohio 44141
Phone: [phone] Fax: [phone]
www.CentralBrass.com
Central Brass
C O M P A N Y
Installation Drawing
The wall mounted sink tting is designed with a solid
cast brass body with replaceable seats. The anges
are all brass and have 1/2-inch male pipe connec-
tions. The inlet supply location is adjustable by rotat-
ing the ange to obtain a 1/4-inch center variation.
The 14-inch spout has a water saving aerator that
limits the ow. The stems are all brass with a double
O-Ring seal and rubber seat washer. The canopy
handles are zinc die cast with a chrome plated n-
ish. The faucet and anges are polished and copper,
nickel, and chrome plated. The soap dish and post
are brass with a chrome plated nish.
Flow Rate: 2.0 GPM @ 60 psi
ADA Compliant and Meets ASME A112.18.1M
Certied by IAPMO R&T to NSF/ANSI 61