Data Sheet

ManualsBrandsCentrak ManualsElectronicsMini MM Patient/Asset Tag ITD/U-766E/H, -7622E/H,-7623E/H

Technical Specifications

Operation

Wi-Fi Band 2.4 GHz (802.11 b/g)

Wi-Fi Location Protocols CCX, ACX

Network Operation Protocols

(Fleet Management Only)

DHCP, TCP/IP, UDP

Security Authentication Protocols

WPA2 Enterprise: WPA2-PSK,

EAP PEAPv0 MSCHAPv2, EAP TLS

Bluetooth Connectivity

(Provisioning Only)

BLE

FCC Operating Range (Americas) 902-928 MHz

CE Operating Range (Europe, Mid East) 868-870 MHz

Other Operating Ranges

(China, Singapore)

868-868.6 MHz

Configurable Button YES

LED Indicator YES

Motion Sensor YES

Gen2IR Sensor YES

Low Frequency Sensor YES, 125 KHz

Dimension

Case Length / with bracket 1.65 in (42 mm) / 1.81 in (46 mm)

Case Height (thickness) / with bracket 0.59 in (15 mm) / 0.67 in (17 mm)

Case Width / with bracket 1.3 in (33 mm) / 1.46 in (37 mm)

Case Weight (with battery) 0.78 oz (22 g)

Environmental/Cleaning

Operating Temperature (Tag) -20 °C to +75 °C

Storage Conditions

Storage Temperature: 10 °C to 25 °C

Humidity: 50% - 85% RH

Sealing Water resistant, IPX7

Tag Cleaning Method See Tag Disinfection Guide for instructions

Power

Battery Type Lithium CR2450

Battery Replacement Field Replaceable, rotating battery cover

™

, Clinical-Grade Locating

™

and CenTrak

are registered trademarks of CenTrak Inc.

ITD-766E H 030921

ITD-766E H Mini Multi-Mode Asset Tag

This component complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) The device may not cause harmful interference, and 2) this device must accept any

interference received, including interference that may cause undesired operation. Modifying or tampering with the transceiver’s or receiver’s internal components can cause a malfunction, invalidate the

warranty, and will void FCC authorization to use these products. This product or its systems are covered by one or more of the following U.S. patents: 5,917,425, 7,061,428, 7,378,964, 7,619,532.

L ‘ utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique

reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.