User Manual

CENDO – Handleiding Flex Inductie kookplaat KR99FI3TS

ENGLSH

* You can set the timer up to 10 hours.

7.12.1 Using the Timer as a Minute Minder

1. Make sure the hob is turned on. And zone selection key is not activated (zone indication

‘-’ is not blinking).

NOTE: You can set minute minder before or after cooking zone power setting finished.

2. Touch timer key, “000” will show in the timer display.

You can set 1 minute each time by short touch, or 10 minutes by long touch.

1. When the time is set, it will begin to count down immediately. The display will show the

remaining time.

2. Buzzer will bips for 30 seconds and the timer indicator shows “- - ” when the setting

time finished.

7.12.2 Using the timer to switch off one or more cooking zones

1. Touch the heating zone selection that you want to set the

timer for.

2. Touch the timer key to select the time when display is blinking.

You can set 1 minute each time by short touch, or 10 minutes by long touch.

When the time is set, it will begin to count down immediately. The display will show the

remaining time.

NOTE: There will be a dot in the right bottom corner of power level indication which indicating

that zone is selected.

3. When cooking timer expires, the corresponding cooking zone will be switched off

automatically.

NOTE: Other cooking zones will keep operating if they are turned on previously.