User Manual

CENDO – Handleiding Flex Inductie kookplaat KR99FI3TS

ENGLSH

7 Using your Hob

7.1 To start cooking

After power on, the buzzer beeps once, all the indicators light up for 1 second then go out,

indicating that the hob has entered the state of standby mode.

1. Touch the ON/OFF switch.

2. Place a suitable pan on the cooking zone that you wish to use. Make sure

the bottom of the pan and the surface of the cooking zone is clean and dry.

3. Touch the heating zone selection and an indicator next to the key will

flash.

4. Select a heat setting by sliding the power level control.

a. If you don’t choose a heat setting within 1 minute, the Induction hob will

automatically switch off. You will need to start again at step 1.

b. You can modify the heat setting at any time during cooking.

7.2 When you have finished cooking

1. Touch the heating zone selection that you wish to switch off.

2. Turn the cooking zone off by slide down to”0”. Make sure the

display shows”0”.

3. Turn the hob off by touching the ON/OFF control.

4. Beware of hot surfaces

“H” will show which means cooking zone is too hot to touch. It will disappear when the

surface has cooled down to a safe temperature. It can also be used as an energy saving function

if you want to heat further pans, use the hotplate that is still hot.