Specifications

1. Use as intended only.

2. Keep metal objects away from charging pad at all times.

3. Keep indoors and dry. Do not expose to water or other liquids..

4. Do not expose to temperatures below 32°F or above 113°F.

5. Do not use as drink coaster.

6. Do not place a device on this item that does not support

wireless charging.

7. This product is not a toy. Do not allow children to play with charger.

8. Inspect before every use; do not use if parts are loose, cracked,

or damaged.

9. Do not open the housing of the charger pad.

SPECIFICATIONS

Device Case Thickness: up to 1/4”

Temperature Range: 32°F to 113°F

Charge Modes: 5W, 7.5W, 10W with compatible

device and power supply

INSTRUCTIONS

SAFETY INFORMATION

Device Requirements

Wireless charging compatible

IPhone 8 or newer

Samsung Galaxy Note 8/S8

plus or other device that

supports 10W wireless charging

Power Output

7.5W

10W

Power Supply

5V, 2A

QC 2.0 or better

fast charging

adapter

(9V, 1.67A)

WIRELESS CHARGING PAD

PAGE 1
WIRELESS CHARGING PAD INSTRUCTIONS SPECIFICATIONS Device Case Thickness: up to 1/4” Temperature Range: 32°F to 113°F Charge Modes: 5W, 7.5W, 10W with compatible device and power supply Power Output Device Requirements Power Supply 5W Wireless charging compatible 5V, 2A 7.5W IPhone 8 or newer 10W Samsung Galaxy Note 8/S8 plus or other device that supports 10W wireless charging QC 2.0 or better fast charging adapter (9V, 1.67A) SAFETY INFORMATION 1. Use as intended only. 2.
PAGE 2
OPERATION INSTRUCTIONS Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings there in before set up or use of this product. 1. Connect the USB cable from the inlet on the Charging Pad to a power adapter or another device that can supply USB power. The Indicator will light to indicate power is connected. ! Note: The power supply must support fast charging as noted on the facing page if that is desired. 2.
PAGE 3
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.