Specifications

6. To install the new breaker, insert the side with the wire terminals in the receptacle

first, and then push in on the opposite side until completely seated.

7. Reconnect the wires in the same position from which they were removed from the

original circuit breaker.

8. After assuring that all tools and foreign materials have been removed from the

electric control cabinet, and that all personnel are clear of the unit, turn on the

power. As the power is turned on, visually inspect for signs of "arcing". If any

arcing is detected immediately turn off the power, examine the wires, and assure

the tightness of all connections.

9. If no arcing is detected, the unit is ready for operation.