Installation Guide

BRIXMENT
®
Mortar Cement
Providers of Quality
Products and
Technical Support
for:
Portland and Blended Cements,
Slag, and Fly Ash
Saylor’s Portland and
Saylor’s PLUS Cements
BRIXMENT, Brick-Lok, and
VELVET Masonry Cements
Flamingo-BRIXMENT Colored
Cements for Masonry
combination of portland cement
that meets ASTM C 150, finely
ground limestone and proprietary
admixtures that enhance boardlife
and durability.
TYPES AND USES:
BRIXMENT Mortar Cement is
avaiable in Type S.
Type S mortar can be used for
above-grade and below-grade
construction.
MANUFACTURER:
ESSROC Cement Corp.
Corporate Office
3251 Bath Pike
Nazareth, PA 18064
800-437-7762
www.essroc.com
PRODUCT DESCRIPTION:
BRIXMENT Mortar Cement is a
prepackaged mortar cement
meeting or exceeding the
requirements of ASTM C 1329.
Essroc carefully selects and
blends the raw materials and
follows stringent quality control
procedures in the manufacturing of
BRIXMENT Mortar Cement.
This attention to detail results in a
superior performing masonry
cement for use in mortar during
construction and for long lasting,
water-resistant walls.
BENEFITS:
• High Bond Strength
• Excellent workability
• Superior board life
• Long- term durability
APPLICATIONS:
BRIXMENT Mortar Cement can be
used for mortar in the construction
of all types of masonry walls. The
most common masonry units
utilized are concrete block, clay
and concrete brick and natural and
manufactured stone.
MATERIAL COMPOSITION:
BRIXMENT Mortar Cement is
a