Specifications
33
71
6.2.2) Insert into the spindle shaft, the DPE spacer required to activate the coolant system.
If it necessary to use an APE... adaptor, the bit must fi rst be fi tted into the corresponding
APE adaptor and locked with the appropriate grub screw, then the DPE spacer inserted.
Note: Adaptors type APED… (e.g. APED 135/165) do not require use of DPE spacer.
6.2.3) Insert the bit-spacer unit in the spindle shaft so that the two engaging dogs on the bit
spigot line up with the grub screws. Press the bit-spacer unit home against the
inner seat of the spindle: this will enable the DPE spacer to open the coolant
circuit (see Fig. 10).
6.2.4)
Clamp the bit by fully tightening the two grub screws (18) using the 4 mm male allen
key
.
FIG. 10 – ASSEMBLING THE
BIT-SPACER UNIT
FIG. 9 – ASSEMBLING SPIRAL BITS
FIG. 11 – MANUAL SPINDLE
ROTATION
07
18
DPE *
DPE
Bits PE ... (e.g. PE70)
Bits PE ... (e.g. PE 220)
APE ...
* use only for APE, not required for APED
23 12
The LD-41P drilling machine features a 4-stroke petrol engine run on unleaded regular
grade petrol only. Pump octane rating 86 or higher.
For refuel proceed as follow:
– Check the fuel level by looking through the translucent fuel tank.
– Stop the engine and open the fuel cap, if the engine has been running, allow it to cool.
– Refi ll fuel to the upper level.
– Do not overfi ll with fuel.
– When fi lling the fuel tank, always use the fuel fi lter.
– Wipe off any spilled fuel before starting the engine.
FUEL
FILLER CAP
10. CHECK FUEL
WARNING
- Petrol is extremely fl ammable and explosive.
- DO NOT SMOKE.
- Refuel in a well ventilated area away from fl ame or sparks.
- Stop engine and allow it to cool before refueling.
- Exhaust gas contains carbon monoxide, an odourless and deadly poison.
- Do not run engine in an enclosed area.
- To avoid a serious burn, do not touch a hot engine or exhaust.
- The engine becomes hot during operation.
- To avoid an electric shock, do not touch spark plug, plug cap or spark
plug lead during engine running.
TAPPO SERBATOIO
LIVELLO SUPERIORE
FUEL FILLER CAP
MAXIMUM
FUEL LEVEL