Technical data

MODEL No.
BP-14LN
BP-14LN High Capacity Battery
Designed for exclusive use on all LIC series tools
3.0 Ah Capacity
* The battery has a limited life. When
capacity becomes about 1/2 of the
original capacity, the battery should
be replaced.
* If the battery is stored without being
charged, natural drainage will cause
the power to be reduced. Be sure to
charge the battery every 3 months.
* When the battery is used for the first
time, the battery will need to be fully
charged before use.
*
Cycles per charge will vary depending
on the type and size of the material
being cut or compressed.
The BP-14LN is developed for IZUMI LIC-
Series.
Environmentally friendly : contains no
hazardous substances.
Light weight : weighs only 65%
compared with BP-70EI Ni-Cad battery.
No memory effect : it can be charged
at anytime.
Low self discharge rate : Longer shelf life
because of low self discharge rate.
New slide in battery installation : gives
more secure connection with the tool
and quick and easy connection and
removal.
BP-14LN life expectancy is more than
300% in comparison with Ni-Cad and
Ni-metal battery , BP-70E BP-70MH etc.
BP-70E : 600 recharges
BP-70MH : 600 recharges
BP-14LN : more than 1800 recharges.
Output voltage : 14.4 VDC
Capacity : 3.0 Ah
Type : Lithium Ion
Charge time :
25 min (80% capacity)
40 min (100% capacity)
107 (L) x 63 (H) x 80 (W) mm
570 g
SPECIFICATIONS
SIZE
WEIGHT
FEATURES REMARKS
2
LITHIUM ION BATTERY OPERATED TOOLS