Technical data

MODEL No.
EP-100W
EP-100W
EP-100W shown with HPE-4
Max connector outer diameter : Approx. 75 mm
100 ton class compression head
Dies are sold separately.
* Specify the manufacturer's die and
connector numbers.
* Light weight
* Removable die cap for easy
connector positioning
* Simple design for easy maintenance
* Double acting hydraulic pump
required
* The HPE-4 or HEP-4M Engine driven
hydraulic pump is recommended to
operate the EP-100W
The EP-100W is a 100 ton class compression
head for full tension, transmission and
substation connections and require an
external double acting 68.5Mpa pumping
source.
Double acting means hydraulically
advancing the ram to build proper
tonnage, then the hydraulic pressure is
reversed to retract the ram. It expedites
ram retracting time.
Removable die cap design helps operator
with easy insertion and removal of the
connector.
Dies are exclusive to this model not
interchangeable with other make.
Ram stroke : 22 mm
Oil volume required : 230 cc
Output force : 980 kN
200 (Dia) x 359 (H) mm
32.0 kg
SPECIFICATIONS
SIZE
WEIGHT
FEATURES REMARKS
73
HYDRAULIC COMPRESSION TOOLS