Technical data

MODEL No.
LP-430B
LP-430B
Example of dies
Accepts existing 12 ton U-type dies
* Low pressure hydraulic compression
tool
* Direct power input from truck PTO
* Relief setting at 13.7Mpa (2,000 PSI)
* Suitable for bucket truck use
* Specify the manufacturer's die and
connector numbers
The LP-430B hydraulic tool is directly
powered by PTO (Power Take Off) from
utility bucket trucks or any vehicle with a
low pressure hydraulic circuit having Line
pressure of 13.7Mpa or 2,000 PSI and a
maximum flow of 35 liters/min.or 9 GPM.
The LP-430B is designed to operate with
either Open-Center or Closed Center
hydrarlic system by rotating the head to
the position.
The LP-430B has the same compression
head as the EP-431 so that dies are
interchangeable with all 12 ton U-type
dies.
It has built-in relief valve to prevent
overloading the tool from more than
13.7Mpa or 2,000 PSI of input pressure.
LP-430B is fitted with a two step safety
trigger to assist in eliminating
accidenta l operation.
Trigger guard is rubber coated to
protect user against sharp edges.
Jaw Opening : 30mm
Force at die face :
110 kN
127 (Dia) x 557 (L) mm
8.4 kg
SPECIFICATIONS
SIZE
WEIGHT
FEATURES REMARKS
69
HYDRAULIC COMPRESSION TOOLS