Technical data

MODEL No.
BP-70I
BP-70I Intelligent battery
BP-70I with CH-70DC 1H Charger
* The battery has a limited life. When
capacity becomes about 1 / 2 of the
original capacity, the battery should be
replaced.
* If the battery is stored without being
charged, natural drainage will cause the
power to be reduced. Be sure to charge
the battery every 3 months.
* The battery will need to be fully charged
before first time use.
* Remaining battery capacity level To
check remaining battery capacity level,
press the check button. The remaining
battery capacity level is displayed for
about 5 seconds.
Recharge the battery when the bottom
light starts to blink.
* Charging level
While the battery is charged, the
indicator lights up as the capacity level
increases.
* Number of charges
Keep pressing the check button for 10
seconds to show number of charges
performed. LED pattern shows number in
binary system.
Compatible with all 14.4V E-Robo series tools
1.3Ah Capacity
"Smart" Replacement Battery
The BP-70I intelligent battery is the same
as the BP-70R with the addition of LED
display. The LED on the side of the
battery allows the user to monitor the
status of the battery's total life and
power in between charges.
It also allows visual evaluation of battery
power while in use.
When not used with the tool, just press
the check button to get an instant
read-out of charge remaining.
Output voltage : 14.4 VDC
Capacity : 1.3Ah
Type : Nickel Cadmium
Charge time :
15 min with CH-35R or CH-35EMC
LED indicator : Capacity,
recharge cycles
100 (L) x 137 (H) x 75 (W) mm
750 g
SPECIFICATIONS
SIZE
WEIGHT
FEATURES REMARKS
41
BATTERY PACK