Technical data

104
MODEL No.
SH-70B
SH-70B
Punching capacity : 20.5 mm diameter
hole on 13 mm thickness mild steel
* Powerful perforation up to 13 mm
thick mild steel with a 20.5 mm
maximum hole
* Recommended for angle iron, plates,
beams and bus bars
* Stripper guide extends to grip
material before punching so that
bending and binding or slippage can
be avoided
* Stripper guide clamps punch in
place to free operator's hands
* 70 mm throat depth allows commonly
used angle iron
* New fixed Support stand.
The portable SH-70B punch was
designed to punch holes through 13
mm mild steel, aluminum and copper.
A stripper guide extends on either side
of the ram to strip the material after
punching. This powerful punch will
operate from any 68.5Mpa (10,000 PSI)
hydraulic pump.
The SH-70B comes complete with four
sets of punch and die sizes for 3/8", 1/2",
5/8" and 3/4" bolts, hand pin, carrying
case.
Throat depth : 70 mm
Oil volume required : 82 cc
Output force : 304 kN at 68.5 Mpa
pressure
360 (H ) x 210 (W) x 95 (D) mm
14.0 kg
Punch & Die for mild steel :
10.5, 13.5, 17.5, 20.5mm
diameter, Hand pin,
Steel carrying case
・For copper & Aluminum
Cu6, Cu7, Cu8, Cu9, Cu10,
Cu10.5, Cu11, Cu12, Cu13.5,
Cu17.5, Cu20.5
・For mild steel
(every other mm)
S6~S19
Optional punch &die
SPECIFICATIONS
SIZE
WEIGHT
ACCESSORIES
FEATURES REMARKS
HYDRAULIC PUNCHES