Technical data

96
MODEL No.
R14E-F1
R14E-F1
R14E-F1 shown with EP-510HC
Rated pressure : 68.5 Mpa or 10,000 PSI
* Two stage pumping system for rapid
advance
* Adjustable output pressure to 68.5
Mpa
* 360 degree swivel joint for hose
maneuverability
* Visual oil level
* Durable steel cover
* Wired remote control
The R14E-F1 remote operated pump
gives the operator complete control.
Push buttons permit the operator to
advance and retract at will. The
operator is never committed to a full
cycle, and can always back off at any
time during the advance even under
pressure. This feature increases efficiency
because cuts and crimps can be
adjusted as necessary, simply by
stopping the advance or retract mode.
The electric motor shuts off when UP
button is released and the pressure
reaches to preset valve. of 68.5Mpa.
The ram can be retracted while DOWN
button is depressed.
A 3 meter remote control cable provides
both safety and convenience. The
operator can set up an operation and
then move away from the work site
before engaging the tool.
Oil delivery (50Hz) :
2.9 liter / min at low pressure
0.3 liter / min at high pressure
Input : Single phase 50 / 60 Hz 120 V
or 220 V 340 W motor
Reservoir capacity : 2 liter
Cable length of remote control
switch : 3 m
250 (L) x 160 (W) x 355 (H) mm
16.5 kg (14.5 kg dry)
2 m hydraulic hose attached
SPECIFICATIONS
SIZE
WEIGHT
ACCESSORIES
FEATURES REMARKS
HYDRAULIC PUMP