TOOLS FOR ELECTRICAL WIRING Head Office in Matsumoto IZUMI PRODUCTS COMPANY TOOLS FOR ELECTRICAL WIRING IZUMI PRODUCTS COMPANY www.izumi-products.co.jp E-mail: tool@izumi-products.co.jp 3039 Sasaga, Matsumoto, Nagano-ken, 399-8721 JAPAN Tel : +81-263-58-5757 Fax : +81-263-86-1002 URL: http://www.izumi-products.co.jp E-mail: tool@izumi-products.co.jp LITHO IN JAPAN BY SOGO PRINTING CO. / CAT No.
TECHNICAL DATA EP-100W/EP-200W DIES A B B A EP-100W EP-200W 83 120 FOR STEEL SLEEVES DIE NO. We, IZUMI, are a manufacture of tools for the electric utility industry. With our company policy “ quality is life of the company ”, we are committed to provide safe and high quality products that meet a wide range of customer`s demands. PRODUCTS ● Cutters for electrical wiring and crimping tools for wire connecting ● A full line of steel punches for sheet metal and angle bars.
DISTRIBUTION NETWORK AMERICA Brazil LINHA VIVA EQUIPAMENTOS LTDA. Rua Pedro Alves 110-118 Parate, Santo Cristo, Rio de Janeiro, RJ. 20220-281 BRASIL Tel.55-21-2274-4704 Fax.55-21-2274-3371 E-mail : linhaviva@openlink.com.br URL : http://www.linhaviva.com.br USA,Canada,Mexico HUSKIE TOOLS,INC. 198 North Brandon Dr., Glendale Heights, IL. 60139, USA Tel.1-800-860-6170 Fax.1-800-345-3767 E-mail : info@huskietools.com URL : http://www.huskietools.
New zealand HTC SPECIALISED TOOLING LTD. 33A Springs Road, East Tamaki, Auckland, NEW ZEALAND Tel.64-9-271-0800 Fax.64-9-271-0801 E-mail : info@specialisedtools.co.nz Pakistan POWER ENGINEERS CORPORATION 1ST FLOOR, VENUS PLAZA, EGERTON ROAD, LAHORE PAKISTAN Tel.92-42-6303448 Fax.92-42-6365533 E-mail : powereng@lhr.comsats.net.pk Contact Person: Mr. Aqeel Ahmad Philippines Adamas International Trading 5J.de Mesa St.,Little Baguio San Juan,Metro Manila, Philippines 1500 Tel.+63(2)7274288 Fax.
INDEX LITHIUM ION BATTERY OPERATED TOOLS BATTERY OPERATED CRIMPING TOOLS LIC-558U……………………………… 4 LIC-551F… …………………………… 5 LIC-5431……………………………… 6 LIC-5510……………………………… 7 LIC-5630……………………………… 8 LIC-50… ……………………………… 9 LIC-S524………………………………10 LIC-S540………………………………11 LIC-585YC… …………………………12 LIC-5200MX… ………… 13.14.15.
LP-430B… ……………………………69 EP-520C… ……………………………70 EP-60S…………………………………71 EP-60D…………………………………72 EP-100W………………………………73 EP-200W………………………………74 SH-10 (A)P, SH-10 (B)P… ……… 102 SH-5PDG…………………………… 103 SH-70B……………………………… 104 HYDRAULIC CUTTERS PB-10N……………………………… 105 PB-15N……………………………… 106 S-200… ………………………………75 S-240… ………………………………76 S-320… ………………………………77 S-400… ………………………………78 S-550… ………………………………79 850… …………………………………80 SP-20A…………………………………81 SP-24… ………………………………82 SP-32… ………………………………83 SP-40A…………………………………84 SP-55A……………
IZUMI PRODUCTS COMPANY LITHIUM ION BATTERY OPERATED TOOLS Well balanced design New Slide in battery connection system World wide Multi-voltage Charger (100-240V ) 1 BP-14LN Lithium-Ion battery provides more cycles per charge in comparison with our Ni-cad and Ni-metal battery
LITHIUM ION BATTERY OPERATED TOOLS MODEL No. BP-14LN Designed for exclusive use on all LIC series tools 3.0 Ah Capacity SPECIFICATIONS Output voltage : 14.4 VDC Capacity : 3.0 Ah Type : Lithium Ion Charge time : 25 min (80% capacity) 40 min (100% capacity) SIZE 107 (L) x 63 (H) x 80 (W) mm WEIGHT 570 g BP-14LN High Capacity Battery FEATURES REMARKS The BP-14LN is developed for IZUMI LICSeries. Environmentally friendly : contains no hazardous substances.
LITHIUM ION BATTERY OPERATED TOOLS MODEL No. CH-25LNW Multi-voltage Battery Charger (100 -240V ) SPECIFICATIONS Input Voltage: 100-240V AC (50/60HZ) 145VA (100V) – 148VA (240) SIZE 230 (L) X 80 (H) X 145 (W) mm WEIGHT 1.6 kg CHARGE TIME FOR BP-14LN 25min. (80% capacity) 40min. (100% capacity) CH-25LNW FEATURES REMARKS Multi voltage and quick charger (100V-240V) for Lithium-Ion battery BP-14LN. Stand by-Red blinking It takes only 40min to charge 100% capacity.
LITHIUM ION BATTERY OPERATED TOOLS MODEL No. LIC-558U Accepts Burndy W type dies and Kearney/ Blackburn O type dies SPECIFICATIONS Ram stroke : 13 mm Motor : 14.4 VDC Reservoir capacity :100 cc Force at die face :54 kN BP-14LN Battery use only. SIZE 332 (L) x 295 (H) x 84 (W) mm WEIGHT 3.
LITHIUM ION BATTERY OPERATED TOOLS MODEL No. LIC-551F Accepts Beku type dies widely used in European countries Applicable range : up to 150mm2 Cu connectors (Approx. 20mm across vertex of hexagon) SPECIFICATIONS Ram stroke : 15 mm Motor : 14.4 VDC Reservoir capacity : 100 cc Force at die face : 52 kN BP-14LN Battery use only. SIZE 322 (L) x 294 (H) x 84 (W) mm WEIGHT 3.
LITHIUM ION BATTERY OPERATED TOOLS MODEL No. LIC-5431 Accepts existing 12 ton U-type dies SPECIFICATIONS Ram stroke : 31 mm Motor : 14.4 VDC Reservoir capacity : 135 cc Force at die face : 106 kN BP-14LN Battery use only. SIZE 392 (L) x 315 (H) x 84 (W) mm WEIGHT 6.1 kg (without battery) ACCESSORIES Shoulder strap, Double molded carrying case, Battery and charger LIC-5431 shown with 14LN FEATURES REMARKS The LIC-5431 is a 12 ton class compression tool operated by eco-friendly Li-Ion battery.
LITHIUM ION BATTERY OPERATED TOOLS MODEL No. LIC-5510 Accepts existing 12 ton U-type dies SPECIFICATIONS Ram stroke : 42 mm Motor : 14.4 VDC Reservoir capacity : 135cc Force at die face : 106 kN BP-14LN Battery use only. SIZE 419 (L) x 320 (H) x 84 (W) mm WEIGHT 7.
LITHIUM ION BATTERY OPERATED TOOLS MODEL No. LIC-5630 Up to 32mm outer diameter connector SPECIFICATIONS Ram stroke : 29 mm Opening between nibs : 32 mm Reservoir capacity : 100 cc Output force : 60 kN BP-14LN Battery use only. SIZE 368 (L) x 272 (H) x 71 (W) mm WEIGHT 4.
LITHIUM ION BATTERY OPERATED TOOLS MODEL No. LIC-50 The new powerful magnetic motor with high torque SPECIFICATIONS Drive unit : 14.4V DC Motor Maximum cutting diameter : Nonferrous 50 mm BP-14LN Battery use only. SIZE 84 (L) x 365 (H) x 130 (W) mm WEIGHT 2.1 kg (without battery) ACCESSORIES Steel carrying case, Battery and charger LIC-50 shown with BP-14LN FEATURES The new powerful magnetic motor with high torque offers superior performance to the REC-50.
LITHIUM ION BATTERY OPERATED TOOLS MODEL No. LIC-S524 Cuts steel materials as well as cables SPECIFICATIONS Ram stroke : 24 mm Motor : 14.4 VDC Reservoir capacity : 100 cc Output force : 84 kN BP-14LN Battery use only. SIZE 315 (L) x 304 (H) x 84 (W) mm WEIGHT 4.
LITHIUM ION BATTERY OPERATED TOOLS MODEL No. LIC-S540 Cuts steel materials as well as cables. SPECIFICATIONS Ram stroke : 40 mm Motor : 14.4 VDC Reservoir capacity : 135cc Output force : 68 kN BP-14LN Battery use only. SIZE 441 (L) x 325 (H) x 85 (W) mm WEIGHT 6.
LITHIUM ION BATTERY OPERATED TOOLS MODEL No. LIC-585YC Cuts CCP cables up to 85 mm CU and AL strands upto 60mm SPECIFICATIONS Ram stroke : 44 mm Motor : 14.4 VDC Reservoir capacity : 135 cc Output force : 80 kN BP-14LN Battery use only. SIZE 517 (L) x 325 (H) x 86 (W) mm WEIGHT 6.
LITHIUM ION BATTERY OPERATED TOOLS MODEL No. LIC-5200MX Non-insulated terminals: 14, 22, 38, 60, 70, 80, 100, 150, 200 mm2 Angle beam fabricating attachments and many other attachments SPECIFICATIONS Ram stroke : 17 mm Motor : 14.4 VDC Reservoir capacity : 100 cc Force at die face : 127 kN BP-14LN Battery use only. SIZE 356 (L) x 306 (H) x 84 (W) mm WEIGHT 5.
MODEL No. 200AT-50YC Cable Cutter Cutting capacity: up to 50mm cable (including insulation) # of cuts/charge (BP-14LN) Cu 3×150mm2 (46mmOD) Cu 500mm2 (45mmOD) 40 34 REMARKS Cuts nonferrous cables only. A MODEL No. 200AT-S16 Cutting capacity: Re-bar Cutter # of cuts/charge (BP-14LN) 16mm rebar 16mm soft steel bar 13mm stainless steel bar 120 120 105 B MODEL No.
MODEL No. 200AT-9PD Knock out Puncher Punching capacity : up to B104 (115.5mm) diameter hole on 3.2mm thickness mild steel 34/charge (BP-14LN) REMARKS Punch & die, Set bolts, Collars are the same as those used for SH-10. 200AT-9PD comes with Set bolts and Collars. Punch and die are sold separately. (See SH-10 page) D MODEL No. 200AT-AP18 Angle Steel Puncher Punching capacity: φ10.5, φ13.5, φ17.5 mm holes on 6mm thickness steel 186×130×67 mm 3.
MODEL No. 200AT-Hex Hexagonal Compression Dies Compression Dies & # of compression per charge Size Cu8 〜 14-12 Cu22 〜 38-14 Cu45 〜 70-19 Cu75 〜 100-23 Cu110 〜 125-26 Cu150-29 Cu180 〜 200-32 Across vertex 12 14 19 23 26 29 32 Die width 18.4 15 11 9 11 10 10 REMARKS # of compression for Cu180 〜 200-32 : 35 (BP-14LN) G MODEL No. 200AT-16B Dies for C-connectors Compression Dies & # of compression per charge.
BATTERY OPERATED COMPRESSION TOOLS MODEL No. ECO-50 Battery Operated Compression Tool SPECIFICATIONS Ram stroke : 15 mm Motor : 14.4 VDC Applicable Hex Compression : Max. 150mm2 Cu Lugs Force at die face : 52 kN SIZE 397 (L) x 79 (H) x 70 (W) mm WEIGHT 2.3kg (without battery) 3.
BATTERY OPERATED COMPRESSION TOOLS MODEL No. REC-551F Accepts Beku type dies widely used in European countries Applicable range : up to 150mm2 Cu connectors (Approx. 20mm across vertex of hexagon) SPECIFICATIONS Ram stroke : 15 mm Motor : 14.4 VDC Reservoir capacity : 100 cc Force at die face : 52 kN SIZE 323 (L) x 253 (H) x 70 (W) mm WEIGHT 3.
BATTERY OPERATED COMPRESSION TOOLS MODEL No. REC-558U Accepts Burndy W type dies and Kearney/ Blackburn O type dies SPECIFICATIONS Ram stroke : 13 mm Motor : 14.4 VDC Reservoir capacity :100 cc Force at die face :54 kN SIZE 333(L) x 253(H) x 59(W) mm WEIGHT 3.4 kg (without battery) ACCESSORIES Double molded carrying case, Shoulder Strap Battery and charger (See P115 for selection) REC-558U shown with BP-70MH FEATURES Electronic circuit board with LED indicates compression status and battery capacity.
BATTERY OPERATED COMPRESSION TOOLS MODEL No. REC-5431 Accepts existing 12 ton U-type dies SPECIFICATIONS Ram stroke : 31 mm Motor : 14.4 VDC Reservoir capacity : 135 cc Force at die face : 106 kN SIZE 392 (L) x 343 (H) x 70 (W) mm WEIGHT 5.
BATTERY OPERATED COMPRESSION TOOLS MODEL No. REC-5510 Accepts existing 12 ton U-type dies SPECIFICATIONS Ram stroke : 42 mm Motor : 14.4 VDC Reservoir capacity : 135cc Force at die face : 106 kN SIZE 421(L) x 286(H) x 78(W) mm WEIGHT 7.
BATTERY OPERATED COMPRESSION TOOLS MODEL No. REC-H5130 Accepts existing 12 ton U-type dies, dies for deep indent crimps SPECIFICATIONS Ram stroke : 30 mm Motor : 14.4 VDC Reservoir capacity : 135 cc Force at die face : 120 kN SIZE 402 (L) x 256 (H) x 78 (W) mm WEIGHT 5.
BATTERY OPERATED COMPRESSION TOOLS MODEL No. REC-3410 Accepts existing 12 ton U-type dies SPECIFICATIONS Ram stroke : 25 mm (Jaw opening) Motor : 14.4 VDC Reservoir capacity : 170 cc Force at die face : 106 kN SIZE 395 (L) x 275 (H) x 90 (W) mm WEIGHT 7.
BATTERY OPERATED COMPRESSION TOOLS MODEL No. REC-3430 Accepts existing 12 ton U-type dies SPECIFICATIONS Ram stroke : 30 mm (Jaw opening) Motor : 14.4 VDC Reservoir capacity : 170 cc Force at die face : 106 kN SIZE 410 (L) x 275 (H) x 90 (W) mm WEIGHT 7.
BATTERY OPERATED COMPRESSION TOOLS MODEL No. REC-3510 Accepts existing 12 ton U-type dies SPECIFICATIONS Ram stroke : 42 mm (Jaw opening) Motor : 14.4 VDC Reservoir capacity : 170 cc Force at die face : 106 kN SIZE 440 (L) x 275 (H) x 90 (W) mm WEIGHT 8.
BATTERY OPERATED COMPRESSION TOOLS MODEL No. REC-3610 Accepts existing 15 ton P type dies as well as 12 ton U-type dies SPECIFICATIONS Ram stroke : 50mm Motor : 14.4 VDC Reservoir capacity : 170cc Force at die face : 134 kN SIZE 480 (L) x 275 (H) x 90 (W) mm WEIGHT 10.
BATTERY OPERATED CRIMPING TOOLS OTHERS MODEL No. REC-5200MX Non-insulated terminals: 14, 22, 38, 60, 70, 80, 100, 150, 200 mm2 Angle beam fabricating attachments and many other attachments SPECIFICATIONS Ram stroke : 17 mm Motor : 14.4 VDC Reservoir capacity : 100 cc Force at die face : 127 kN SIZE 356 (L) x 326 (H) x 70 (W) mm WEIGHT 5.
BATTERY OPERATED CRIMPINGOTHERS TOOLS MODEL No. REC-55PDF Punching capacity : 3.2 mm thick mild steel or 1.6 mm stainless steel with 115.5 mm (4”) holes SPECIFICATIONS Ram stroke : 22 mm Motor : 14.4 VDC Reservoir capacity : 100 cc Output force : 73 kN SIZE 328 (L) x 254 (H) x 70 (W) mm WEIGHT 3.
BATTERY OPERATED CUTTERS MODEL No. REC-S524 Cuts steel materials as well as cables SPECIFICATIONS Ram stroke : 24 mm Motor : 14.4 VDC Reservoir capacity : 100 cc Output force : 84 kN SIZE 316 (L) x 263 (H) x 70 (W) mm WEIGHT 4.4 kg (without battery) ACCESSORIES Shoulder strap, Double molded carrying case, Battery and charger, (See P115 for selection) REC-S524 shown with BP-70MH Head Cutter Opened FEATURES REMARKS The REC-S524 was designed to cut the toughest steel used in construction today.
BATTERY OPERATED CUTTERS MODEL No. REC-S540 Cuts steel materials as well as cables. SPECIFICATIONS Ram stroke : 40 mm Motor : 14.4 VDC Reservoir capacity : 135cc Output force : 70 kN SIZE 442 (L) x 351 (H) x 78 (W) mm WEIGHT 6.1 kg (without battery) ACCESSORIES Shoulder strap, Double molded carrying case, Battery and charger (See P115 for selection) REC-S540 shown with BP-70MH FEATURES REMARKS The REC-S540 was designed to cut the ACSR cables used in transmission line construction work.
BATTERY OPERATED CUTTERS MODEL No. REC-530Y Al strands : 28mm(240mm2) Cu strands : 28mm(250mm2) ACSR : 19mm(120mm2) (Single strand steel core) SPECIFICATIONS Ram stroke : 21mm Motor : 14.4 VDC Reservoir capacity : 100cc Output force : 60 kN SIZE 372(L) x 265(H) x 70(W) mm WEIGHT 4.
BATTERY OPERATED CUTTERS MODEL No. REC-585YC Cuts CCP cables up to 85 mm CU and AL strands upto 60mm SPECIFICATIONS Blade opening : 85mm Motor : 14.4 VDC Reservoir capacity : 135 cc Output force : 80 kN SIZE 518(L) x 340(H) x 87(W) mm WEIGHT 6.
BATTERY OPERATED CUTTERS MODEL No. REC-S3550 Cuts steel materials as well as cables up to 54mm SPECIFICATIONS Ram stroke : 56 mm Motor : 14.4 VDC Reservoir capacity : 280 cc Output force : 120 kN SIZE 490 (L) x 275 (H) x 90 (W) mm WEIGHT 9.
BATTERY OPERATED CUTTERS MODEL No. REC-50M Maximum cutting diameter: Nonferrous 50 mm SPECIFICATIONS Drive Unit : 14.4V DC Motor SIZE 84 (L) x 365 (H) x 130 (W) mm WEIGHT 2.1 kg (without battery) ACCESSORIES Steel carrying case, Battery and charger (See P115 for selection) REC-50M shown with BP-70MH REC-50M FEATURES REMARKS The new powerful magnetic motor with high torque offers superior performance to the REC-50.
BATTERY OPERATED CUTTERS MODEL No. REC-54 Maximum cutting diameter : Nonferrous 54 mm and Steel supported 400 pair telecom cable SPECIFICATIONS Drive unit : 14.4V DC Motor SIZE 105 (L) x 410 (H) x 115 (W) mm WEIGHT 2.5 kg (without battery) ACCESSORIES Steel carrying case, Battery and charger (See P115 for selection) REC-54 shown with BP-70I FEATURES REMARKS The REC-54 was designed to cut SS cable or overhead CCP cable with Steel strand Support.
BATTERY OPERATED CUTTERS MODEL No. REC-54AC Maximum cutting diameter : Nonferrous 54 mm SPECIFICATIONS Drive unit : 14.4V DC Motor SIZE 105 (L) x 410 (H) x 115 (W) mm WEIGHT 2.5 kg (without battery) ACCESSORIES Steel carrying case, Battery and charger (See P115 for selection) REC-54AC shown with BP-70E REC-54AC FEATURES REMARKS The REC-54AC was specifically designed for cutting the toughest copper and aluminum cables in a limited amount of space. Cuts are clean with minimal cable distortion.
BATTERY OPERATED CRIMPING TOOLS MODEL No. REC-5630 Up to 32mm outer diameter connector SPECIFICATIONS Ram stroke : 29 mm Opening between nibs : 32 mm Reservoir capacity : 100 cc Output force : 60 kN SIZE 369(L) x 280(H) x 70(W) mm WEIGHT 4.
BATTERY OPERATED CRIMPING TOOLS MODEL No. REC-5750 Up to 750KCM Anderson type connector SPECIFICATIONS Ram stroke : 31.5 mm Opening between nibs : 36 mm Reservoir capacity : 100 cc Output force : 60 kN SIZE 383(L) x 340(H) x 75 (W) mm WEIGHT 4.
BATTERY OPERATED CRIMPING TOOLS OTHERS MODEL No. REC-P2 68.5 Mpa battery operated hydraulic pump with remote control SPECIFICATIONS Motor : 28.8 VDC Oil delivery : Low pressure 1.8 liter / min High pressure 0.4 liter / min Reservoir volume : 1,000 cc (60 cubic inch) Oil pressure : 68.5 Mpa or 10,000 PSI SIZE 272 (L) x 304 (H) x 143 (W) mm WEIGHT 14.0 kg (without battery) ACCESSORIES Remote control switch, 2 meter wire wound rubber hose, Battery and charger OT-MWB:Lithium Ion Battery 28V 3.
BATTERY OPERATED CRIMPINGOTHERS TOOLS MODEL No. SB-3UK Shear Bolt Impact Wrench SPECIFICATIONS Torque : 196 N.m Speed : 0~2,200 rpm Motor : 14.4 VDC Socket Retainer : 1/2" SIZE 350 (L) x 180 (H) x 75 (W) mm WEIGHT 1.6 kg (without battery) ACCESSORIES Double molded carrying case, Battery and charger (See P115 for selection) SB-3UK SB-3UK FEATURES REMARKS The SB-3UK is a battery operated impact wrench especially designed to torque down the shear bolts for electrical connection use.
BATTERY PACK MODEL No. BP-70I Compatible with all 14.4V E-Robo series tools 1.3Ah Capacity SPECIFICATIONS Output voltage : 14.4 VDC Capacity : 1.3Ah Type : Nickel Cadmium Charge time : 15 min with CH-35R or CH-35EMC LED indicator : Capacity, recharge cycles SIZE 100 (L) x 137 (H) x 75 (W) mm WEIGHT 750 g BP-70I Intelligent battery FEATURES REMARKS "Smart" Replacement Battery * The battery has a limited life.
BATTERY PACK MODEL No. BP-70E Compatible with all 14.4V E-Robo series tools 1.9 Ah Capacity SPECIFICATIONS Output voltage : 14.4 VDC Capacity : 1.9 Ah Type : Nickel Cadmium Charge time : 25 min with CH-35R or CH-35EMC SIZE 100 (L) x 137 (H) x 70 (W) mm WEIGHT 800 g BP-70E High Capacity Battery FEATURES REMARKS Standard Replacement Battery * The battery has a limited life. When capacity becomes about 1/2 of the original capacity, the battery should be replaced.
BATTERY PACK MODEL No. BP-70EI Compatible with all 14.4V E-Robo series tools 1.9 Ah Capacity SPECIFICATIONS Output voltage : 14.4VDC Capacity : 1.9Ah Type : Nickel Cadmium Charge time : 25 min with CH-35R or CH-35EMC LED indicator : Capacity, recharge cycles SIZE 100 (L) x 137 (H) x 75 (W) mm WEIGHT 820 g BP-70EI High Capacity Intelligent Battery BP-70EI (Orange latch for 1.9Ah) FEATURES REMARKS The BP-70EI intelligent battery is the same as the BP-70E with the addition of LED display.
BATTERY PACK MODEL No. BP-70MH Compatible with all 14.4 V E-Robo series tools 3.0Ah Capacity (Nickel-metal hydride battery) SPECIFICATIONS Output voltage : 14.4 VDC Capacity : 3.0 Ah Type : Nickel-metal hydride battery Charge time : 40 min with CH-35R or CH-35EMC SIZE 100(L) x 140(H) x 70(W) mm WEIGHT 850g BP-70MH High Capacity Battery BP-70MH shown with CH-35R (light blue Top Cover For 3.0 Ah) FEATURES REMARKS High Capacity Nickel metal hydride battery. * The battery has a limited life.
CHARGER MODEL No. CH-3FC2 Regular battery charger SPECIFICATIONS Input voltage : CH-3TC (120V), CH-3FC2 (220V / 240V switchable) Capacity : 50VA Charge time : 1 hour for BP-70R or BP-70I, 90 minutes for BP-70E or BP-70EI, 3 hours for BP-250R1 SIZE 212 (L) x 95 (H) x 105 (W) mm WEIGHT 1.9 kg CH-3FC2 1 hour Charger FEATURES REMARKS Standard One Hour Battery Charger * The LED indicator lights up and stays while charging. The CH-3FC2 is one hour charger for the BP-70R and BP-70I.
CHARGER MODEL No. CH-35R or CH-35EMC 40 minutes quick charger for BP-70MH SPECIFICATIONS Input voltage : CH-35R(120V) CH-35EMC(230V) Capacity : CH-35R (220VA) CH-35EMC (230VA) SIZE 200(L) x 95(H) x 115(W )mm WEIGHT 900g CH-35R 40 minutes Charger with BP-70MH FEATURES REMARKS 40 Minutes Charger for High capacity battery, BP-70MH.
CHARGER MODEL No.
CRIMPING TOOLS MODEL No. EP-150A Non-insulated terminals : 14, 22, 38, 60, 70, 80, 100, 150 mm2 SPECIFICATIONS * Two stage pumping * Relief value * Reservoir capacity : 83cc Output force : 90 kN SIZE 512 (L) mm WEIGHT 3.7 kg ACCESSORIES Dedicated Indentor : 14, 22, 38-70, 80-150 mm2 (4 pieces), Double molded carrying case EP-150A FEATURES REMARKS The EP-150A is a hydraulic indenting tool for non-insulated terminals and sleeves up to 150mm2.
CRIMPING TOOLS MODEL No. 12A Non-insulated terminals : 8, 14, 22, 38, 60, 70, 80, 100, 150, 180, 200, 325 mm2 SPECIFICATIONS Maximum input pressure: 700 bar Oil volume required : 90 cc Output force : 226 kN SIZE 280 (L) mm WEIGHT 7.5 kg ACCESSORIES Steel carrying case with die tray 12A FEATURES REMARKS The 12A is a hydraulic indenting head Standard dies included for non-insulated terminals and sleeves in the set : up to 325mm2.
CRIMPING TOOLS MODEL No. AC-5ND Insulated terminals : 2.0 mm2 (blue) SPECIFICATIONS Applicable air pressure : 0.48~0.58 Mpa Air consumption : 34 liters/min at 30 crimps/min Output force : 12.7 kN at 0.48 Mp air pressure SIZE 215 (L) x 135 (H) x 90 (W) mm WEIGHT 2.7 kg with Foot pedal ACCESSORIES Standard foot pedal Jaws are sold separately AC-5ND Example of AC-5ND Jaws FEATURES REMARKS * Capable of crimping several types of terminals up to 5.5mm2 with interchangeable jaws.
HYDRAULIC COMPRESSION TOOLS MODEL No. 15B T-11 to T-122 Izumi C-Connectors SPECIFICATIONS Two stage Pumping Reservoir capacity : 83 cc Ram stroke : 15 mm Force at die face : 59 kN SIZE 465 (L) mm WEIGHT 3.0 kg ACCESSORIES T-20, T-26, T-44, T-60, T-76, T-98, T-122 dies Double molded carrying case 15B FEATURES REMARKS The 15B hand hydraulic tool was designed to accommodate compressing Izumi C-Connectors up to T-122. Dies for smaller size connectors and non-insulated terminals available.
HYDRAULIC COMPRESSION TOOLS MODEL No. 16B T-20 to T-365 Izumi C-Connectors SPECIFICATIONS Oil volume required : 44 cc Ram stroke : 25 mm Force at die face : 118 kN SIZE 286 (L) mm WEIGHT 4.5 kg ACCESSORIES T-154, T-190, T-240, T-288, T-365 dies Steel carrying case 16B 16B shown with carrying case FEATURES REMARKS Dies for smaller size C-Connectors and non-insulated terminals available. The #16B is a compression head designed to compress Izumi C-Connectors.
TECHNICAL DATA COMPRESSION TOOLS FOR TAP-OFF CONNECTORS To branch conductor from main run, compress IZUMI TAP-OFF CONNECTORS (C-CONNECTORS) by IZUMI COMPRESSION TOOLS exclusively designed for TAP-OFF purpose. No.15B for up to T-122 No.16B T-450 T-560 T-700 EP-520C for up to T-365 for up to T-700 WEIGHT LENGTH APPLICABLE MODEL TYPE OUTPUT (kN) (kgs) (mm) RANGE NO.15B Hand Hydraulic STANDARD ACCESSORIES REMARKS Dies for non-insulated ter- 59 3kgs 465 T-11*,T-16*,T-20,T-26,T-44 1.
TECHNICAL DATA IZUMI TAP-OFF CONNECTOR (C-CONNECTOR) The range of C-CONNECTORS are manufactured in'C' shaped copper section for connection of main and tap copper conductors.
HYDRAULIC COMPRESSION TOOLS MODEL No. CN-58A Accepts BURNDY W dies SPECIFICATIONS Ram stroke : 19 to 24 mm adjustable Reservoir capacity: 60cc Force at die face : 54 kN SIZE 525 (L) x 130 (W) mm WEIGHT 3.2 kg ACCESSORIES Double molded carrying case CN-58A FEATURES REMARKS The CN-58A was designed to accept both Burndy MD6 W insert dies and Kearney / Blackburn O type / OD58 insert dies. Dies are sold separately.
HYDRAULIC COMPRESSION TOOLS MODEL No. EP-50 Accepts BEKU type dies Up to 150 mm2 Cu lug SPECIFICATIONS Ram stroke : 15 mm Reservoir capacity :60cc Force at die face : 52 kN SIZE 370 (L) x 130 (W) mm WEIGHT 2.0 kg ACCESSORIES Double molded carrying case EP-50 EP-50 (One hand operation to hold connector) FEATURES REMARKS The EP-50 was designed to accept dies for BEKU type mechanical tool widely used in European countries. Dies are sold separately.
HYDRAULIC COMPRESSION TOOLS MODEL No. EP-410 Accepts existing 12 ton U-type dies SPECIFICATIONS Ram Stroke : 25 mm Reservoir Capacity : 124 cc Force at die face : 106 kN SIZE 585 (L) x 150 (W) mm WEIGHT 6.0 kg ACCESSORIES Double molded carrying case EP-410 FEATURES REMARKS The EP-410, hand operated compression tool features a two stage rapid advance pumping system. It accepts all U type dies currently manufactured for 12 ton tools on the market. Dies are sold separately.
HYDRAULIC COMPRESSION TOOLS MODEL No. EP-H130 Accepts existing 12 ton U-type dies, dies for deep indent crimps SPECIFICATIONS Ram stroke : 28 mm Oil volume required : 51 cc Force at die face : 120 kN SIZE 317 (L) mm WEIGHT 4.2 kg ACCESSORIES Steel carrying case with die tray EP-H130H Example of dies FEATURES REMARKS The EP-H130H is a H-head with a one inch jaw opening. It accepts all shell type dies and dies for deep indent crimps currently used in 12 ton tool on today's market.
HYDRAULIC COMPRESSION TOOLS MODEL No. EP-431 Accepts existing 12 ton U-type dies SPECIFICATIONS Ram stroke : 31 mm Reservoir capacity : 145 cc Force at die face : 106 kN SIZE 610 (L) x 150 (W) mm WEIGHT 6.4 kg ACCESSORIES Double molded carrying case EP-431 EP-431 shown with carrying case FEATURES REMARKS The EP-431 is unique in that it has a large jaw opening of 31mm, and is able to splice 31mm outer diameter conductors. Dies are sold separately.
HYDRAULIC COMPRESSION TOOLS MODEL No. EP-510C Accepts existing 12 ton U-type dies SPECIFICATIONS Ram stroke : 42 mm Reservoir capacity : 200 cc Force at die face : 118 kN SIZE 644 (L) x 150 (W) mm WEIGHT 8.0 kg ACCESSORIES Double molded carrying case EP-510C EP-510C shown with PG-610 test gauge FEATURES REMARKS The EP-510C, hand operated compression tool features a two stage rapid advance pumping system. It accepts all U-type dies currently manufactured for 12 ton tools on the market.
CRIMPING TOOLS MODEL No. UC-6B Up to 500KCM Anderson type connector SPECIFICATIONS Ram stroke : 29mm Opening between nibs : 32 mm Output force : 60 kN SIZE 563 (L) mm WEIGHT 5.0 kg ACCESSORIES Steel carrying case UC-6B FEATURES REMARKS The UC-6B dieless crimping tool was designed to install Anderson type connectors up to 500 KCM. * Replaceable bypass cartridge * External pressure adjustment * Swivel head * Fiberglass handles Three movable indenting nibs push connectors against the top fixed nib.
CRIMPING TOOLS MODEL No. UC-6FT2 Up to 750KCM Anderson type connector SPECIFICATIONS Ram stroke : 31.5 mm Opening between nibs : 36 mm Output force : 60 kN SIZE 580 (L) mm WEIGHT 5.6 kg ACCESSORIES Steel carrying case UC-6FT2 FEATURES REMARKS The UC-6FT2 flip-top dieless crimping tool was designed to install Anderson type connectors up to 750 KCM.
HYDRAULIC COMPRESSION TOOLS MODEL No. EP-50H Accepts BEKU type dies Up to 150 mm2 Cu lug SPECIFICATIONS Ram stroke : 15 mm Oil volume required : 18 cc Force at die face : 52 kN SIZE 250 (L) mm WEIGHT 1.6 kg ACCESSORIES Steel carrying case with die tray EP-50H Example of dies EP-50H shown with carrying case 63 FEATURES REMARKS The EP-50H was designed to accept dies for BEKU type mechanical tool widely used in European countries.
HYDRAULIC COMPRESSION TOOLS MODEL No. EP-410H Accepts existing 12 ton U-type dies SPECIFICATIONS Ram stroke : 25 mm Oil volume required : 42 cc Force at die face : 114 kN SIZE 285 (L) mm WEIGHT 3.6 kg ACCESSORIES Steel carrying case with die tray EP-410H FEATURES REMARKS The EP-410H is a traditional C-head with a one inch jaw opening. It accepts all U-type dies currently used in 12 ton tool on today's market. Dies are sold separately Specify the manufacturer's die and connector numbers.
HYDRAULIC COMPRESSION TOOLS MODEL No. EP-H130H Accepts existing 12 ton U-type dies, dies for deep indent crimps SPECIFICATIONS Ram stroke : 28 mm Oil volume required : 51 cc Force at die face : 120 kN SIZE 317 (L) mm WEIGHT 4.2 kg ACCESSORIES Steel carrying case with die tray EP-H130H Die holder & U-type dies EP-H130H shown with carrying case 65 FEATURES REMARKS The EP-H130H is a H-head with a one inch jaw opening.
HYDRAULIC COMPRESSION TOOLS MODEL No. EP-431H Accepts existing 12 ton U-type dies SPECIFICATIONS Ram stroke : 31 mm Oil volume required : 50 cc Force at die face : 106 kN SIZE 340 (L) mm WEIGHT 4.6 kg ACCESSORIES Steel carrying case with die tray EP-431H EP-431H shown with carrying case FEATURES REMARKS The EP-431H is a remote C-head that requires an external 68.5Mpa or 10,000 PSI pumping source for operation. This unit has a larger jaw opening than the EP-410H and EP-H130H.
HYDRAULIC COMPRESSION TOOLS MODEL No. EP-510HC Accepts existing 12 ton U-type dies SPECIFICATIONS Ram stroke : 42 mm Oil volume required : 77 cc Force at die face: 118 kN SIZE 420 (L) mm WEIGHT 5.7 kg ACCESSORIES Steel carrying case with die tray EP-510HC EP-510HC shown with carrying case FEATURES REMARKS The EP-510HC is a remote C-head that requires an external 68.5Mpa or 10,000 PSI pumping source. It accepts all U type dies used with conventional 12 ton compression tools.
HYDRAULIC COMPRESSION TOOLS MODEL No. EP-610HS2 Accepts BURNDY P dies as well as 12 ton U-type dies SPECIFICATIONS Ram stroke : 50 mm (45 mm with die adapter) Oil volume required : 100 cc Force at die face : 139 kN SIZE 375 (L) mm WEIGHT 6.9 kg ACCESSORIES Steel carrying case with die tray EP-610HS2 shown with die adapter Example of dies FEATURES REMARKS The EP-610HS2 is a remote C-head that requires an external 68.5Mpa or 10,000 PSI pumping source. Dies are sold separately.
HYDRAULIC COMPRESSION TOOLS MODEL No. LP-430B Accepts existing 12 ton U-type dies SPECIFICATIONS Jaw Opening : 30mm Force at die face : 110 kN SIZE 127 (Dia) x 557 (L) mm WEIGHT 8.4 kg LP-430B FEATURES REMARKS The LP-430B hydraulic tool is directly powered by PTO (Power Take Off) from utility bucket trucks or any vehicle with a low pressure hydraulic circuit having Line pressure of 13.7Mpa or 2,000 PSI and a maximum flow of 35 liters/min.or 9 GPM.
HYDRAULIC COMPRESSION TOOLS MODEL No. EP-520C Up to 500 mm2 Copper Conductor, 590mm2 Aluminum Conductor SPECIFICATIONS Ram stroke : 26mm between dies Oil volume required : 132 cc Output Force : 294 kN SIZE 125 (Dia) x 380 (H) mm WEIGHT 17.5 kg ACCESSORIES Steel Carrying case Dies (See P131 for selection) EP-520C FEATURES REMARKS The EP-520C is a single acting, 294kN press that is designed to compress Aluminum sleeves and lugs up to 590mm2. Dies are sold separately.
HYDRAULIC COMPRESSION TOOLS MODEL No. EP-60S Accepts existing 60 ton U-type dies Max. connector diameter : Approx. 60mm SPECIFICATIONS Ram stroke : 38.5 mm Oil volume required : 303 cc Force at die face : 540 kN (60 short ton) at 68.5Mpa (10,000 PSI) of oil pressure SIZE 146 (Dia) x 450 (H) mm with Ground stand WEIGHT 22.
HYDRAULIC COMPRESSION TOOLS MODEL No. EP-60D Accepts existing 60 ton U-type dies Max. connector diameter : Approx. 60mm SPECIFICATIONS Ram stroke : 38.5 mm Oil volume required : 303 cc Force at die face : 517kN at 68.5Mpa (10,000 PSI) of oil pressure SIZE 260 (Dia) x 446 (H) mm with Ground stand WEIGHT 23.0 kg ACCESSORIES Steel carrying case, Ground stand Option : Die adapter for 12 ton U-type dies EP-60D EP-60D shown with HPE-4 FEATURES REMARKS The EP-60D is a double acting 60 ton press.
HYDRAULIC COMPRESSION TOOLS MODEL No. EP-100W Max connector outer diameter : Approx. 75 mm 100 ton class compression head SPECIFICATIONS Ram stroke : 22 mm Oil volume required : 230 cc Output force : 980 kN SIZE 200 (Dia) x 359 (H) mm WEIGHT 32.0 kg EP-100W FEATURES REMARKS The EP-100W is a 100 ton class compression head for full tension, transmission and substation connections and require an external double acting 68.5Mpa pumping source. Dies are sold separately.
HYDRAULIC COMPRESSION TOOLS MODEL No. EP-200W Max connector outer diameter : Approx. 100 mm 200 ton class compression head SPECIFICATIONS Ram stroke : 40 mm Oil volume required : 1,134 cc Output force : 1,960 kN SIZE 270 (Dia) x 415 (H) mm WEIGHT 86.0 kg EP-200W FEATURES REMARKS The EP-200W is a 200 ton class compression head which accepts shell type dies exclusively designed for the EP-200W. It requires an external double acting 68.5Mpa pumping source. Dies are sold separately.
HYDRAULIC CUTTERS S-200 Cuts steel materials as well as cables up to 20 mm SPECIFICATIONS Maximum handle load : 235 N Single stage pumping Relief valve is not equipped Reservoir capacity : 60 cc Maximum opening : 22 mm Pumping cycles when no load : 39 times Output force : 66 kN SIZE 400 (L) mm WEIGHT 3.0 kg ACCESSORIES Carrying bag S-200 FEATURES REMARKS Light weight portable hydraulic cutter features : Cutting of piano wire is prohibited.
HYDRAULIC CUTTERS MODEL No. S-240 Cuts steel materials as well as cables up to 24 mm SPECIFICATIONS Maximum handle load : 226 N Two stage pumping Relief valve is not equipped Reservoir capacity : 120 cc Maximum opening : 24 mm Pumping cycles when no load : 13 times Output force : 84 kN SIZE 475 (L) mm WEIGHT 4.9 kg ACCESSORIES Carrying bag S-240 FEATURES REMARKS Light weight portable hydraulic cutter features : Cutting of piano wire is prohibited.
HYDRAULIC CUTTERS MODEL No. S-320 Cuts heavy steel materials up to 32 mm SPECIFICATIONS Maximum handle load : 276 N Two stage pumping Relief valve is equipped Reservoir capacity : 202 cc Maximum opening : 35 mm Pumping cycles when no load : 20 times Output force : 194 kN SIZE 580 (L) mm WEIGHT 12.0 kg ACCESSORIES Carrying bag S-320 FEATURES REMARKS Light weight portable hydraulic cutter features : Cutting of piano wire is prohibited.
HYDRAULIC CUTTERS MODEL No. S-400 Cuts steel materials as well as cables up to 41 mm SPECIFICATIONS Maximum handle load : 196 N Two stage pumping Relief valve is not equipped Reservoir capacity : 120 cc Maximum opening : 42 mm Pumping cycles when no load : 17 times Output force : 55 kN SIZE 575 (L) mm WEIGHT 5.8 kg ACCESSORIES Carrying bag S-400 FEATURES REMARKS Light weight portable hydraulic cutter features : Cutting of piano wire is prohibited.
HYDRAULIC CUTTERS MODEL No. S-550 Cuts steel materials as well as cables up to 54 mm SPECIFICATIONS Maximum handle load : 276 N Two stage pumping Relief valve is equipped Reservoir capacity : 202 cc Maximum opening : 54 mm Pumping cycles when no load : 25 times Output force : 124 kN SIZE 625 (L) mm WEIGHT 10.0 kg ACCESSORIES Carrying bag S-550 FEATURES REMARKS Light weight portable hydraulic cutter features : Cutting of piano wire is prohibited.
HYDRAULIC CUTTERS MODEL No. 850 Cuts cables up to 85 mm SPECIFICATIONS Maximum handle load : 196 N Two stage pumping Relief valve is not equipped Reservoir capacity : 120 cc Maximum opening : 88 mm Pumping cycles when no load : 20 times Output force : 39 kN SIZE 710 (L) mm WEIGHT 8.2 kg ACCESSORIES Carrying bag 850 FEATURES REMARKS Light weight portable hydraulic cutter features : Cutting of piano wire is prohibited.
HYDRAULIC CUTTERS MODEL No. SP-20A Cuts steel materials as well as cables up to 20 mm SPECIFICATIONS Maximum input pressure : 68.5 Mpa Oil volume required : 18 cc Output force : 44 kN SIZE 240 (L) mm WEIGHT 2.3 kg ACCESSORIES Carrying bag SP-20A FEATURES REMARKS The SP-20A hydraulic cutter head features : Cutting of piano wire is prohibited. Cutting capacity * Fast cutting with remote operation * It can be operated by any hydraulic pump with rated oil pressure of 68.
HYDRAULIC CUTTERS MODEL No. SP-24 Cuts steel materials as well as cables up to 24 mm SPECIFICATIONS Maximum input pressure : 68.5 Mpa Oil volume required : 33 cc Output force : 86 kN SIZE 245 (L) mm WEIGHT 3.1 kg ACCESSORIES Carrying bag SP-24 FEATURES REMARKS The SP-24 hydraulic cutter head features : Cutting of piano wire is prohibited. * Fast cutting with remote operation Cutting capacity * It can be operated by any hydraulic pump with rated oil pressure of 68.
HYDRAULIC CUTTERS MODEL No. SP-32 Cuts heavy duty steel materials up to 32 mm SPECIFICATIONS Maximum input pressure : 68.5 Mpa Oil volume required : 135 cc Output force : 250 kN SIZE 300 (L) mm WEIGHT 10.0 kg ACCESSORIES Carrying bag SP-32 FEATURES REMARKS The SP-32 hydraulic cutter head features : Cutting of piano wire is prohibited. * Fast cutting with remote operation Cutting capacity * It can be operated by any hydraulic pump with rated oil pressure of 68.
HYDRAULIC CUTTERS MODEL No. SP-40A Cuts steel materials as well as cables up to 41 mm SPECIFICATIONS Maximum input pressure : 68.5 Mpa Oil volume required : 50 cc Output force : 68 kN SIZE 340 (L) mm WEIGHT 4.0 kg ACCESSORIES Carrying bag SP-40A FEATURES REMARKS The SP-40A hydraulic cutter head features : Cutting of piano wire is prohibited. Cutting capacity * Fast cutting with remote operation * It can be operated by any hydraulic pump with rated oil pressure of 68.
HYDRAULIC CUTTERS MODEL No. SP-55A Cuts steel materials as well as cables up to 55 mm SPECIFICATIONS Maximum input pressure : 68.5 Mpa Oil volume required : 120 cc Output force : 118 kN SIZE 415 (L) mm WEIGHT 9.0 kg ACCESSORIES Carrying bag SP-55A FEATURES REMARKS The SP-55A hydraulic cutter head features : Cutting of piano wire is prohibited. Cutting capacity * Fast cutting with remote operation * It can be operated by any hydraulic pump with rated oil pressure of 68.
HYDRAULIC CUTTERS MODEL No. P-60 Cuts Al & Cu cables up to 60 mm SPECIFICATIONS Maximum input pressure : 68.5Mpa Oil volume required :71 cc Maximum opening : 60 mm Output force : 79 kN SIZE 410 (L) mm WEIGHT 5.2 kg ACCESSORIES Carrying bag P-60 FEATURES REMARKS The P-60 portable hydraulic cutter head features : Cutting of piano wire is prohibited.
HYDRAULIC CUTTERS MODEL No. P-85 Cuts Al & Cu cables up to 85 mm SPECIFICATIONS Maximum input pressure : 68.5Mpa Oil volume required : 65 cc Output force : 40 kN SIZE 460 (L) mm WEIGHT 7.2 kg ACCESSORIES Carrying bag P-85 FEATURES REMARKS The P-85 hydraulic cutter head features : Cutting of piano wire is prohibited. * Fast cutting with remote operation Cutting capacity * It can be operated by any hydraulic pump with rated oil pressure of 68.
HYDRAULIC CUTTERS MODEL No. P-100A Cuts Al & Cu cables up to 100 mm SPECIFICATIONS Maximum input pressure : 68.5Mpa Oil volume required : 140 cc Output force : 74 kN SIZE 590 (L) mm WEIGHT 13.2 kg ACCESSORIES Carrying bag P-100A FEATURES REMARKS The P-100A hydraulic cutter head features : Cutting of piano wire is prohibited. Cutting capacity * Fast cutting with remote operation * It can be operated by any hydraulic pump with rated oil pressure of 68.
HYDRAULIC CUTTERS MODEL No. P-132 Cuts insulated cables up to 132 mm SPECIFICATIONS Maximum input pressure : 68.5Mpa (10.000 PSI) Oil volume required : 220 cc Output force : 95 kN SIZE 630 (L) mm WEIGHT 12.0 kg ACCESSORIES Carrying bag P-132 FEATURES REMARKS P-132 hydraulic cutter head features : Cutting of piano wire is prohibited.
HYDRAULIC CUTTERS MODEL No. YSP-30B Al strands : 28 mm (240 mm2) Cu strands : 28 mm (250 mm2) ACSR: 19 mm (120 mm2) (Single strand steel core) SPECIFICATIONS Maximum input pressure : 68.5 Mpa Oil volume required : 18 cc Output force : 63 kN SIZE 320 (L) mm WEIGHT 3.
HYDRAULIC CUTTERS MODEL No. P-85YC Cuts electric cables up to 85 mm SPECIFICATIONS Maximum input pressure : 68.5 Mpa Oil volume required:50 cc Ram stroke : 43.5 mm Output force : 73.5 kN SIZE 455 (L) x 200 (H) x 120 (W) mm WEIGHT 4.8 kg ACCESSORIES Carrying bag P-85YC FEATURES REMARKS The P-85YC scissors type cutter head was designed to cut various cables used in the industry today. Cutting capacity : It can cut Cu and Al cables up to 60mm and CCP cables up to 85mm.
HYDRAULIC CUTTERS MODEL No. S-32CC1 Soft steel bar : 19 mm Re-bar : 19 mm Al or Cu rod : 25 mm SPECIFICATIONS Maximum handle force : 284 N Reservoir capacity : 165 cc No relief value equipped Output force : 191 kN SIZE 685 (L) mm WEIGHT 10.2 kg ACCESSORIES Carrying bag S-32CC1 FEATURES REMARKS The S-32CC1 hydraulic cutter was specially designed to cut the toughest EHS guy wire, ground and anchor rods.
HYDRAULIC PUMP MODEL No. HP-180N Rated pressure : 0 - 59 Mpa SPECIFICATIONS Oil delivery : 0.9 cc / stroke Reservoir capacity : 180 cc SIZE 320 (L) x 80 (W) x 120 (H) mm WEIGHT 3.7 kg ACCESSORIES 1 m hydraulic hose attached HP-180N FEATURES REMARKS The HP-180N is ideal for SH-10 Punch driver or any small remote heads requiring less than 180 cc of oil volume. Relief valve not equipped.
HYDRAULIC PUMP MODEL No. HP-700A Rated pressure : 68.5 Mpa or 10,000 PSI SPECIFICATIONS Oil delivery : 10.5 cc / stroke at low pressure 1.5 cc / stroke at high pressure Reservoir capacity : 720 cc SIZE 590 (L) x 130 (W) x 160 (H) mm WEIGHT 9.6 kg ACCESSORIES 2 m hydraulic hose attached HP-700A FEATURES REMARKS The HP-700A hand pump has a two speed pump piston for rapid advance and an external adjustable pressure setting up to 68.5Mpa.
HYDRAULIC PUMP MODEL No. FP-700A Rated pressure : 68.5 Mpa or 10,000 PSI SPECIFICATIONS Oil delivery : 10.5 cc / stroke at low pressure 1.5 cc / stroke at high pressure Reservoir capacity : 720 cc SIZE 690 (L) x 150 (W) x 180 (H) mm WEIGHT 10.8 kg FP-700A Bypass cartridge 95 FEATURES REMARKS The FP-700A foot pump has a two speed pump piston for rapid advance and an external adjustable pressure setting up to 68.5Mpa. Hydraulic hose sold separately.
HYDRAULIC PUMP MODEL No. R14E-F1 Rated pressure : 68.5 Mpa or 10,000 PSI SPECIFICATIONS Oil delivery ( 50Hz) : 2.9 liter / min at low pressure 0.3 liter / min at high pressure Input : Single phase 50 / 60 Hz 120 V or 220 V 340 W motor Reservoir capacity : 2 liter Cable length of remote control switch : 3 m SIZE 250 (L) x 160 (W) x 355 (H) mm WEIGHT 16.5 kg (14.
HYDRAULIC PUMP MODEL No. R14E-A1 Rated pressure : 68.5 Mpa or 10,000 PSI SPECIFICATIONS Oil delivery ( 50Hz) : 1.7 liter / min at low pressure 0.4 liter / min at high pressure Input : Single phase 50 / 60 Hz 120 V or 220 V 550 W motor Reservoir capacity : 3 liter Cable length of remote control switch : 3 m SIZE 350 (L) x 330 (W) x 420 (H) mm WEIGHT 32.5kg (29.
HYDRAULIC PUMP MODEL No. HPE-2A Rated pressure : 68.5 Mpa or 10,000 PSI SPECIFICATIONS Oil delivery : 2.6 liter / min at low pressure 0.5 liter / min at high pressure Engine : Air cooled 4 cycle gasoline engine 1.5kw (2.0 ps) / 3,600 rpm, leadfree gasoline Reservoir capacity : 2.2 liter Cable length of remote control switch : 3 m SIZE 470 (L) x 330 (W) x 443 (H)mm WEIGHT 33.
HYDRAULIC PUMP MODEL No. HPE-2D Rated pressure : 68.5 Mpa or 10,000 PSI SPECIFICATIONS Oil delivery : 2.6 liter / min at low pressure 0.35liter / min at high pressure Engine : Air cooled 4 cycle gasoline engine 1.5kw (2.0 ps) / 3,600 rpm, leadfree gasoline Reservoir capacity : 2.2 liter Cable length of remote control switch : 3 m SIZE 530 (L) x 330 (W) x 443 (H) mm WEIGHT 37.5 kg (34.
HYDRAULIC PUMP MODEL No. HPE-4 Rated pressure : 68.5 Mpa or 10,000 PSI SPECIFICATIONS Oil delivery : 7.5 liter / min at low pressure 1.2 liter / min at high pressure Engine : Air cooled 4 cycle gasoline engine 2.2kw (3.0 ps) / 3,600 rpm, leadfree gasoline Reservoir capacity : 10 liter Cable length of remote control switch : 3 m SIZE 665 (L) x 405 (W) x 445 (H) mm WEIGHT 60.0 kg (50.
HYDRAULIC PUMP MODEL No. HPE-4M Rated pressure : 68.5 Mpa or 10,000 PSI Engine Driven Pump for 60,100 & 200 ton presses SPECIFICATIONS Oil delivery : 7.5 liter/min at low pressure 1.2 liter/min at high pressure Engine : Air cooled 4 cycle gasoline engine 2.2kw (3.
HYDRAULIC PUNCHES MODEL No. SH-10 (A) P SH-10 ( B) P Up to 115.5 mm diameter hole perforation on 3.2 mm thickness mild steel SPECIFICATIONS Punching capacity Stainless Steel : 1.6 mm plate thickness Mild steel : 3.2 mm plate thickness Hole diameter : up to 115.5 mm (4 inch) es Ram Stroke : 25 mm Oil volume required : 35 cc Output force : 81 kN at 68.5 Mpa pressure SIZE 63 (Dia) x 125 (H) mm WEIGHT 1.9 kg ACCESSORIES Milli size punch sets are available on request.
HYDRAULIC PUNCHES MODEL No. SH-5PDG Punching capacity : 115.5mm diameter hole on 3.2mm thickness mild steel SPECIFICATIONS Reservoir capacity : 40 cc Output force : 73 kN at 68.5 Mpa pressure Punching capacity Stainless Steel : 1.6 mm plate thickness Mild steel : 3.2 mm plate thickness Hole diameter : up to 115.5 mm (4 inch) es SIZE 353 (L) mm WEIGHT 2.4 kg ACCESSORIES Steel carrying case.
HYDRAULIC PUNCHES MODEL No. SH-70B Punching capacity : 20.5 mm diameter hole on 13 mm thickness mild steel SPECIFICATIONS Throat depth : 70 mm Oil volume required : 82 cc Output force : 304 kN at 68.5 Mpa pressure SIZE 360 (H ) x 210 (W) x 95 (D) mm WEIGHT 14.0 kg ACCESSORIES Punch & Die for mild steel : 10.5, 13.5, 17.5, 20.5mm diameter, Hand pin, Steel carrying case SH-70B Optional punch &die ・For copper & Aluminum Cu6, Cu7, Cu8, Cu9, Cu10, Cu10.5, Cu11, Cu12, Cu13.5, Cu17.5, Cu20.
HYDRAULIC PIPE BENDER MODEL No.
HYDRAULIC PIPE BENDER MODEL No.
OTHER TOOLS MODEL No. NP-400 Peels insulation jacket of the conductor SPECIFICATIONS 10 mm to 32 mm O.D. insulated cable (Vinyl or polyethylene jackets) with insulation thickness of 1.5 mm to 3 mm SIZE 80 (W) x 200 (L) mm WEIGHT 740 g NP-400 FEATURES REMARKS The NP-400 can peel insulation from a conductor with an O.D. of 10 to 32 mm and a maximum insulation thickness of 3 mm. It is necessary to change the blade depth according to the insulation thickness.
OTHER TOOLS MODEL No. IZ-325A Maximum cutting diameter : Nonferrous 33mm or 325mm2 Cu Cable SPECIFICATIONS Cuts up to 325mm2 Cu cable * Light weight and compact * Clean square cutting * Easy cutting operation * Durable construction * Forged cutting cable * Reverse operation allowed SIZE 260 (L) mm WEIGHT 610 g IZ-325A shown with CV 325mm2 Cu Cable FEATURES REMARKS The IZ-325A Ratchet Cable Cutter was designed to cut up to 325mm2 or 33mm outer diameter Cu Cable.
FORCE & PRESSURE TEST GAUGE MODEL No. PG-325 Applicable to check inner pressure of hydraulic system SPECIFICATIONS Dial face up to 100 Mpa SIZE 195 (L) x 105 (W) x 45 (D) mm WEIGHT 1.5 kg ACCESSORIES Steel carrying case PG-325 FEATURES REMARKS The PG-325 is the inline pressure gauge to check inline pressure of the hydraulic system. IMPORTANT NOTE Pressure adjustment of tools require calibrated pressure gauge and appropriate tools to adjust the relief valve.
FORCE & PRESSURE TEST GAUGE MODEL No. PG-58 Applicable to check inner pressure of battery operated pistol type REC5XXX series tools SPECIFICATIONS Dial face up to 100 MPa SIZE 195 (L) x 105 (W) x 45 (D) mm WEIGHT 1.0 kg ACCESSORIES Steel carrying case PG-58 FEATURES REMARKS The PG-58 was designed to measure the inner pressure of battery operated pistol type REC-5XXX series tools.
FORCE & PRESSURE TEST GAUGE MODEL No. PG-15F Applicable to check output force of: 6ton hydraulic compression tools. SPECIFICATIONS Dial face up to 80 kN SIZE 250 (L) x 105 (W) x 45 (D) mm WEIGHT 2.0 kg ACCESSORIES Steel carrying case Test dies for REC-551F and CN-58A PG-15F with test dies PG-15F FEATURES REMARKS The PG-15F force test gauge was designed to check output force of 6 ton compression tools. It comes complete with necessary test dies for force measurement.
FORCE & PRESSURE TEST GAUGE MODEL No. PG-610B Applicable to check output force of; 12 ton and 15 ton hydraulic compression tools SPECIFICATIONS Dial face up to 176 kN SIZE 250 (L) x 105 (W) x 25 (D) mm WEIGHT 1.5 kg ACCESSORIES Steel carrying case Test dies (Blank dies for EP-410) PG-610B PG-610B shown with REC-3610 FEATURES REMARKS The PG-610B force test gauge was designed to measure output force up to 15 ton. It is used to calibrate 12 ton and 15 ton tools.
FORCE & PRESSURE TEST GAUGE MODEL No. PG-UC6 Applicable to check output force of; Dieless hydraulic crimping tools SPECIFICATIONS Dial face up to 80 kN SIZE 250 (L) x 105 (W) x 45 (D) mm WEIGHT 2.0 kg ACCESSORIES Steel carrying case Height spacer for group of models PG-UC6 with test dies PG-UC6 FEATURES REMARKS The PG-UC6 force test gauge was designed to check direct output force of dieless hydraulic crimping tools. It comes complete with height spacer for different models.
FORCE & PRESSURE TEST GAUGE MODEL No. PG-H130 Applicable to check output force of; 12ton type compression tools. SPECIFICATIONS Dial face up to 130 kN SIZE 250 (L) x 105 (W) x 25 (D) mm WEIGHT 1.5 kg ACCESSORIES Steel carrying case Test dies PG-H130 FEATURES REMARKS The PG-H130 force test gauge was designed to measure output force up to 12 ton. It is used to calibrate 12 ton tools. It was designed to fit in all brand 12 ton tools, and is supplied with U type test dies.
TECHNICAL DATA Selection of Battery and Charger All IZUMI battey tools can be custom ordered to include batteries and / or chargers. See selection chart as below to specify selection code when ordering. Ex.
TECHNICAL DATA Selection Chart of Compression Tools (6-15 ton) Designd to accommodate hexagonal,circular shell and indent type dies for applying compression fittings to copper,aluminum and ACSR conductors.
TECHNICAL DATA IZUMI Compression Tools (30-200 ton class) Category Power sause Ram Stroke 30ton 60ton 100ton SINGLE ACTING 200ton DOUBLE ACTING 26mm 38.5mm 22mm 40mm EP-100W EP-200W up to 64mm O.D. Sleeve up to 71mm O.D. Sleeve up to 32mm O.D. Sleeve up to 86mm O.D. Sleeve up to 100mm O.D.Sleeve up to 50mm O.D.
TECHNICAL DATA SELECTION CHART 《Maximum Cutting Capacity》 Hand Hydraulic Cable Cutter Cutting Capacity (Outer Diameter / mm) Wire Rope (Hemp-core) Model Bars Strands Other Cables Output (kN) 6X7 6X12 Soft Bare Soft Rein- Bare Soft AlumiAlumi- ACSR 6X19 Copper Steel forcing Copper nium nium 1x7 Guy Steel Wire Lead 1x19 Tele- Sheathed Under Guy phone Cable ground Steel cable (Telecable Wire (CCP) phone Cable) REC-S524 LIC-S524 84 18 24 24 24 18 20 16 24 24 24 20 20 - - 24 REC-5
TECHNICAL DATA Hand Hydraulic Cable Cutter Cutting Capacity (Outer Diameter / mm) Wire Rope (Hemp-core) Model Bars Strands Other Cables Output (kN) 6X7 6X12 Soft Bare Soft Rein- Bare Soft AlumiAlumi- ACSR 6X19 Copper Steel forcing Copper nium nium 1x7 Guy Steel Wire Lead 1x19 Tele- Sheathed Under Guy phone Cable ground Steel cable (Telecable Wire (CCP) phone Cable) S-550 124 25 30 30 35 28 22 19 54 54 54 15 20 - - 50 850 39 - - - - - - - 28 38 - - - 85 85 50
TECHNICAL DATA Hydraulic Hose Selection Chart Manual Operated Hydraulic Pump HP-700 Recommended Maximum Specification of Pump Length of Hose Reservoir Capacity Hydraulic Cutter Head Hydraulic Compression & Crimping Head Head Type Tool Oil Volume Required (cc) EP-50H 18 EP-410H 42 EP-431H 50 EP-510HC 75 EP-610HS2 100 EP-520C 132 EP-60S 303 EP-60D 303 EP-100W 314 EP-200W 1,134 12A 85 16B 44 SP-20A 18 SP-24 33 SP-32 135 SP-40A 48 SP-55A 120 P-60 71 P-85 65 P-100A
TECHNICAL DATA Size of Conduit JIS standard type Thin Conduit (A) RANGE Shoe Size PB-15N PB-10N A15 A19 A25 A31 A39 A51 A63 A75 Conduit size ① ② ③ Outer Diameter Inner Diameter Wall Thickness 1.2 15.9 13.5 15 5/8 19 3/4 19.1 15.9 1.6 25 1 25.4 22.2 1.6 31 1, 1/4 31.8 28.6 1.6 39 1, 1/2 38.1 34.9 1.6 51 2 50.8 47.6 1.6 63 2, 1/2 63.5 59.5 2.0 75 3 76.2 72.2 2.
TECHNICAL DATA HYDRAULIC TOOL MECHANISM 1. Hand Hydraulic Hand hydraulic tools function using the mechanism described below. F L2 L1 F' d D exhaust valve suction valve f 1. B y raising the pump handle, the small piston draws oil from the reservoir into the small chamber. The amount of oil drawn from the reservoir is the same volume as the small piston displaces. 2. B y lowering the pump handle, the same amount of oil drawn from the reservoir goes into the large chamber. 3.
TECHNICAL DATA NOW LET'S CHECK THE PISTON MOVEMENT PER HANDLE STROKE 1. The oil volume suctioned by the small piston πd2 × small piston movement 4 2. This suctioned oil goes into the large chamber when the pump handle is lowered. (The amount of oil moved from the small to large chamber is the same.) πd2 × small piston movement = π D2 × large piston movement 4 4 Therefore, the large piston movement is shown below. Large piston movement = d2 × small piston movement D2 2.
TECHNICAL DATA 4. The Relief Valve (Bypass Valve) Most of our hydraulic tools are equipped with a relief valve except hand hydraulic cutters. This relief valve functions when oil pressure reaches 68.5 Mpa and bypasses oil to the reservoir. So, it regulates tool output each time tool functions. d D exhaust valve suction valve For some compression tools and pumps, the relief valve is made into a cassette style so that a whole cassette can be replaced without disassembling the tool.
TECHNICAL DATA BATTERY OPERATED HYDRAULIC TOOLS Years of hydraulic crimping and cutting techonology at Izumi invented a line of battery operated hydraulic tools. Izumi is the world's first manufacturer to make hydraulic tools powered by rechargeable Ni-Cd battery. Mechanism of battery operated hydraulic tools is very simple. Manual pumping is replaced by reciprocating motion of pump piston driven by DC motor using cam action. Below diagram shows groups of parts consist of E-Robo tools.
TECHNICAL DATA COMPRESSION DIES Compression dies are a critical part of compressor component since they influence electric characteristics of jointed conductors. As a compression tool manufacturer, we are also involved with die making. However, due to various standards and various fittings by each manutacturer, we do not have our own standard to meet each manufacturer's fittings. With detailed customer's information, we try our best to make suitable dies.
TECHNICAL DATA If cutomers wish to machine their own grooves, we are also ready to supply blank dies. In any case dies are a very important part of compression tools. Please be aware of suggested die number by fitting manufacturer when fittings are purchased. Next 6 pages show the list of dies available from Izumi. Equivalents indicated are closest equivalents and does not infer that they are identical, interchangeable or exact duplicates.
TECHNICAL DATA EP-50 DIES C A 30 B SIDE A B SIDE B C A 30 HEXAGONAL DIES FOR COPPER & ALUMINUM TERMINALS (Suitable for DIN 46235 TERMINALS) DIE NO. SIDE A B C A (K6) Cu10 6.2 2.2 12 B (K8) Cu16 8.2 3.0 12 A (K10) Cu25 Al 16 9.7 3.6 12 B (K12) Cu35 Al 25 11.8 4.4 9 A (K14) Cu50 Al 35 13.8 5.3 8 B (K16) Cu70 Al 50 15.8 6.0 8 A (K18) Cu95 Al 70 18.0 7.0 7 B (K20) Cu120 Al 95 19.8 7.
TECHNICAL DATA EP-410 DIES [ Hexagonal Dies ] A B C EP-410 HEXAGONAL DIES HEXAGONAL DIES FOR COPPER & ALUMINUM TERMINALS (Suitable for TERMINALS wall thickness little less than DIN 46235 terminals) (Suitable for DIN 46235 TERMINALS) DIE NO. K6 K8 K10 K12 K14 K16 K18 K20 K22 K25 K28 K32 K34 A Cu 10 Cu 16 Cu 25 Al 16 Cu 35 Al 25 Cu 50 Al 35 Cu 70 Al 50 Cu 95 Al 70 Cu 120 Al 95 Cu 150 Al 120 Cu 185 Al 150 Cu 240 Al 185 Cu 300 Al 240 Cu 400 Al 300 [mm2] B C DIE NO. A B C 10 5.98 2.59 12 16 7.
TECHNICAL DATA A B C 39.7 EP-60S EP-60S DIES ALCOA TYPE DIES (HEXAGONAL) DIE NO. A 10SH 15.9 6.9 B 32.0 C 12SH 19.3 8.4 23.9 14SH 22.2 9.5 25.4 16SH 25.4 10.9 16.8 18SH 28.6 12.3 15.2 20SH 31.7 13.4 19.0 75SH 10.7 4.6 35.1 76SH 12.7 5.5 28.4 20AH 31.8 13.5 59.7 24AH 38.1 16.3 49.5 27AH 42.8 18.2 43.2 30AH 47.6 20.2 57.0 34AH 54.0 23.0 46.2 36AH 57.2 24.2 44.5 74AH 20.8 8.7 62.0 75AH 25.4 10.6 62.0 76AH 30.2 12.6 61.
TECHNICAL DATA EP-520C DIES [Hexagonal Dies] C B B 2 100(EP-1000A) 80(EP-520C) A DIES FOR COPPER CONDUCTOR (Suitable for JIS C2804 Terminals) EP-1000A EP-520C Tool DIE NO. 1000-64 725~850-56 600-51 400~500-47 325-42 250-38 240-36 180~200-32 150-29 110~125-26 75~100-23 45~70-19 22~38-14 8~14-12 A 47 42 38 36 32 29 26 23 19 14 12 EP-520C B 20.35 18.19 16.45 15.59 13.86 12.56 11.26 9.96 8.23 6.06 5.
TECHNICAL DATA EP-100W/EP-200W DIES A B B A EP-100W EP-200W 83 120 FOR STEEL SLEEVES DIE NO. We, IZUMI, are a manufacture of tools for the electric utility industry. With our company policy “ quality is life of the company ”, we are committed to provide safe and high quality products that meet a wide range of customer`s demands. PRODUCTS ● Cutters for electrical wiring and crimping tools for wire connecting ● A full line of steel punches for sheet metal and angle bars.
TOOLS FOR ELECTRICAL WIRING Head Office in Matsumoto IZUMI PRODUCTS COMPANY TOOLS FOR ELECTRICAL WIRING IZUMI PRODUCTS COMPANY www.izumi-products.co.jp E-mail: tool@izumi-products.co.jp 3039 Sasaga, Matsumoto, Nagano-ken, 399-8721 JAPAN Tel : +81-263-58-5757 Fax : +81-263-86-1002 URL: http://www.izumi-products.co.jp E-mail: tool@izumi-products.co.jp LITHO IN JAPAN BY SOGO PRINTING CO. / CAT No.
