Instructions

Carefully turn the Main Body upside-down on a non-scratching and stable surface. Be careful to prevent
damage to the cosmetic finish or your floor surfacing (Fig.1).
Fit the wheel assemblies onto the Main Body by placing the U-shaped bolts between the outermost fins on
each side of the Main Body (see Fig.2 - 4).
Securely fasten the wheel assemblies onto the Main Body by screwing the wing nuts onto the U-shaped bolts
(see Fig. 5).
IMPORTANT: Please fit the wheel assemblies as per the diagram. Any other
position may affect the stability of the heater.
WARNING: Only operate the heater in normal upright position with wheel
assemblies attached to the bottom, any other position could create a hazardous
situation.
WARNING: Heater must not be used without the feet, castors, and the wheels
fitted.
Assembly
Before using this appliance, the castor plates and castor wheels (supplied separately in the
carton), must be fitted to the unit. The screw pack to attach the feet to your appliance will
be taped to either one of the feet for your appliance, or taped to the plug.