User Manual

all logged data every three hours to save battery power. Measurement and transmission intervals are

adjustable in the Celsiview cloud service. Measuring more often than once every hour will affect the

properties of the wood material (measurement object) and may result in inaccurate readings. To restart

the above process or if the sensor does not connect properly, disconnect one battery, wait 60 seconds

and reconnect it again. (or press the Reset-switch if there is one on the circuit board)

Add/change measurement locations linked to the sensor

Click on ”Sensors” in the menu. At the far right of the line for the sensor, some symbols are displayed.

To add a measuring location (value) click on the plus sign and enter a name/prex for the readings,

e.g. ”Moisture content level”. Press ”OK”. The location is now created and can be found under the menu

item ”Locations”.

To change a setting/name of a location, e.g. set the

measurement curve (fur/spruce/Protimeter WME),

click on ”Locations” in the menu and then on the tool

symbol on the right of the line or click on a line and

select ”Go to settings”.

By clicking on the star symbol on the far right of a location row, or selecting ”Make a favorite” after

clicking on a row, that measurement will appear as a favorite (widget) on the home screen. (Menu item

”Home”)

The options ”Settings”, ”Reports” and ”Make a favourite” etc. are also accessible by simply clicking on

any row/location on the ”Locations” page.

Reports

To print or export reports/measurements, click on ”Reports” in the menu. Select what to display in the

report/graph by the menu options above the graph. It also selects the time period you want to look at.

Click on the ”Export” button to download or send the report as e.g. an Excel le or PDF.

My business

In the ”My business” menu, sites can be structured into different groups/folders. Right-click on ”Groups

and locations” to create a group/folder. Then drag and drop the measurement locations you want into

any group.

A group or location can also be shared with another person by right-clicking on the location or group

and selecting ”Share”. Select ”Create new user”, enter the email address of the person to be assigned

to the site/group. Automatically, the username of that person will be set to the same as the email

address. Click on ”OK”. The new recipient now appears in the list of selectable recipients. Select the

rights the new user should have. Click on ”OK”. The new user will now receive an e-mail asking him to

choose a password. The new user can then log in with their details and will have access to what has

been distributed.

Add a measuring location (value)