Specifications

3.EF.40.Rev. 1.0 12
icon shows the current thermostat heat setting.
This icon will stay on screen for 3 seconds. If no other buttons are pressed during this time, the icon will
disappear from the screen and continue to run at this thermostat setting.
When the thermostat icon is on screen, the thermostat heat setting can be changed by pressing
The buttons to increase or decrease the regulated temperature.
The on screen icon will now display the new heat setting. There are ten comfort levels to select
from.
Once a satisfactory setting has been selected, wait for 3 seconds for the icon to disappear and
the thermostat is now set.
Note: The unit will continue to run in thermostat mode until the appliance is switched OFF or the
unit is set to manual heat mode.
5.2.4 How to use the function settings.
To enter function mode. Press the button. This will display the first of the six available
functions on screen.
The six functions are as follows:
Flame Image Flame Speed Volume Mood Lighting Brightness Sleep Timer
To access each of the functions simply continue to press the
button until the required
function is displayed.
The icon will stay on screen for 3 seconds. If no other buttons are pressed during this time, the icon will
disappear from the screen and continue to run in with its current setting.
The buttons should be used to change the relevant function setting.
Descriptions of the six function modes are shown separately in the sections below.