User manual

Tutorial: Handel-C and PSL basics
The figure below shows the GraphicsDemo3 project running in simulation on the PalSim Virtual Platform.
To run the example yourself, open the
TutorialVGA workspace (Start>Programs>Celoxica>Platform
Developer's Kit>Tutorials>TutorialVGA on the Start Menu), set GraphicsDemo3 as the active project, set the
Active Configuration to Sim, then build and run the project. For a Celoxica RC200 board with a VGA
monitor connected, set the Active Configuration to RC200, rebuild, then use the Place and Route tools
to generate a bitfile to download to the board.
PALSIM RUNNING GRAPHICSDEMO3
www.celoxica.com
Page 70