User manual

DSM tutorials
C:\program files\celoxica\pdk\software\lib\palsim.lib
The Linker tab with all the libraries set up for simulation is show below.
LINKER SETTINGS FOR SIMULATION
Customizing the hardware configuration
The RC200 configuration must be set up in a similar way to the simulation configuration, but the
preprocessor definition should be
USE_RC200, and the included Handel-C libraries should be rc200.hcl
and pal_rc200.hcl.
The Technology Mapper should also be enabled, as it allows DK to produce faster circuits. This is set on
the
Synthesis tab in Project Settings. (The option is only available if you base your hardware configuration
on the EDIF configuration.) No C++ modules are required to be linked in.
www.celoxica.com
Page 60