User manual

DSM tutorials
On the Preprocessor tab, add USE_SIM to the Preprocessor definitions box, as shown below. This definition
is used to specify which PAL target is to be used for this configuration.
SETTING PREPROCESSOR DEFINITIONS
The final step in setting up the new configuration is to go to the Linker tab in the Project Settings, and add
libraries which are required for PAL. For simulation the target is the PalSim Virtual Platform, which
requires the Handel-C libraries
sim.hcl and pal_sim.hcl to be added. The C++ library palSim.lib is also
required, and must be included explicitly in the
Additional C/C++ Modules box. It is possible to browse to
locate the C++ module, the default path would be:
www.celoxica.com
Page 59