User manual

Tutorial: Using the logic estimator
The next step is to switch on the retimer. The settings for retiming are accessed through the
Project->Settings menu, from which you must select the Synthesis tab, as shown below:
RETIMING SETTINGS
To enable retiming, simply check the box next to Enable Retiming. You must also have Enable Technology
Mapper
checked to use retiming. The other requirement for retiming is that you must have a rate
specification on your clock, as shown below:
set clock = external with {warn = 0, rate = 120};
Open the
Retiming1 project in the TutorialFIR workspace, accessible from Start>Programs>Celoxica>Platform
Developer's Kit
>Tutorials>TutorialFIR on the Start Menu. Build the project for EDIF - you will see the retimer
giving you information about what it is doing, in the DK
Output window:
www.celoxica.com
Page 124