Specifications

Installation and set-up
7-segment pins Display segment RC200 FPGA pins RC203FPGA pins
A1 a G3 J5
B1 b H4 K6
C1 c L3 N5
D1 d L4 N6
E1 e K3 M5
F1 f F3 H5
G1 g G4 J6
DP1 decimal place L5 N7
Display 1 (display on right-hand side)
7-segment pins Display segment RC200 FPGA pins RC203FPGA pins
A2 a J4 L6
B2 b J3 L5
C2 c H5 K7
D2 d F5 H7
E2 e L6 N8
F2 f H3 K5
G2 g G5 J7
DP2 decimal place K4 M6
4.16 ATA / Expansion header
The RC200/203 has a 50-pin expansion header including 34 general I/O pins, 3 power pins (+12V, +5V,
+3.3V) and 2 clock pins.
You can also use 40 of the pins for ATA, but only UDMA4 or higher devices are supported.
2
The FPGA expansion header pins can only accept signals up to 3.3v. Signals greater than
3.3v may damage the FPGA.
www.celoxica.com
Page 30