User manual

3
CTR-180 M2M Router Manual
CELOT WIRELESS
1. Introduction
This manual is for users who use CTR-100 as 3G Wi-Fi Router.
For the pursoe of 3G M2M appliction, please contact to Celot Wireless.
1.1 Feature
CTR-180 provides functions as follows;
● CTR-180 enables you to access to the internet by using wireless network
(CDMA REV.A network).
● CTR-180 supports multi-interfaces including USB, Full UART (RS232C/RS485),
Lite-UART, I2C and RJ.
● CTR-180 supports direct serial works as if a serial device is directly connected
to a remote server by server mode or client mode.
● DATA back-up during the operation of direct serial.
● 3G wireless network always connection mode or on demand mode.
● Auto-reset based on pre-defined schedule.
● DDNS manual setting
● USB host
● CTR-180 displays the status of the operation with 4 LEDs.
● IEEE802.11b/g/n support : up to150Mbps built-in wireless AP.
● Browser-based configuration and easy set-up wizard.
● NAT, VPN Pass-Through function.
● Industry-leading firewall security.
● Automatic receipt of IP address with DHCP server.
● CTR-110W can be powered by back-up battery
●
SMA Antenna Connector.
●
GPS Module can be connected trough Lite-UART