User manual

26
CTR-180 M2M Router Manual
CELOT WIRELESS
● NTP Setting
● Sync with NTP server to set Current time
● Select Time Zone
● Input NTP Server
● Input time for NTP Sync time (hours)
● DDNS Setting
-
CTR-180 will update the DNS server with its IP addresses when a network
supports Dynamic DNS (DDNS).
3.5.4 Administration>Upload Firmware
This page is to upgrade Firmware and boot loader
● To Upgrade the SW of CTR-180, click [Browsing] Icon, choose the right BIN file
and click [APPLY] Icon. Then, the SW upgrade will start.
※
Note
If you choose the wrong BIN file to upgrade CTR-180, it will cause an error or
malfunction and CTR-180 will be out of order. So please make sure to use the
BIN file officially released from CELOT Wireless only!
3.5.5 Administration>Settings Management