User manual

12
CTR-180 M2M Router Manual
CELOT WIRELESS
CTR-180 can add and remote custom internet routing and enable dynamic routing
exchange protocol.
● ADD a routing rule
- Input IP range for “Destination”,
- Select Range (HOST/NET)
- Input value for ”Netmask”,
- Input IP for ”Gateway”
- Select Interface (LAN/WAN/Custom) and input IP
● Dynamic Routing
- You can select Disable/Enable
3.3 Wireless Setting
3.3.1 Wireless > Basic
1). CTR-180 was released from the factory without any wireless security for user’s
convenience. You can easily set up wireless security and network setting in
Setup Wizard.
2). Click Wireless > Basic then the window below will be displayed.