Installation Guide

ManualsBrandsCellwood ManualsBuilding materialsCedar Dimensions Shingle 24 in. Polypropylene Siding Sample in White

gable vents

For Installation onto Masonry

Surfaces

Fasten the screen to the inside or

outside of the wall opening. Discard

the base. (Fig.1)

Drill four equally spaced holes

around the outer front surface of the

vent face. (Fig. 2)

Place the vent face over the exterior

wall opening, level it and fasten it

to the wall using masonry fasteners.

(Fig. 3)

NOTE: On new homes, the vent face

may be recessed into the brick.

Drill 4 Equally

Spaced Holes

Screen

Base

Fig.1

Fig. 2

Fig. 3

41