Installation Manual

- 8 -
4.4. Installing a WLC-100M
Remove the WLC-100M module from its protective packaging.
Avoiding Electrostatic Discharge
Before you install the WLC-100M module, ground yourself by touching
a piece of metal to avoid electrostatic discharge (ESD). You should
also take the following precautions to prevent damage to the
WLC-100M module:
Keep the WLC-100M module in its antistatic-shielded bag until
you are ready to install it.
Handle the WLC-100M module by its edges.
Ensure the connector is connected to above Model’s board tightly.