User's Manual

- 18 -
6. Click the Admin tab. This window allows you to control the Bridge as
an administrator.
- Administrator Settings: Change your password in this window.
Re-enter the new password to confirm. It can be up to 14 characters
in length. Please keep a copy of your password in a safe place.
Click Apply, if you have made any changes.
- System Settings: The current system settings can be saved as a file
onto the local hard drive by clicking Save. The saved file can be
loaded back on the Bridge by clicking Browse. When you have
selected the settings file, click Load. Click Restore to return to
Factory Default Settings.
- Firmware Upgrade: This item shows the information of the firmware
for the Bridge, and allows you to upgrade the firmware version.