User's Manual
- 12 -
Configuration of the Bridge
Before configuring the Bridge, please consider the following:
- You will need a JavaScript-enabled web-browser such as the Internet
Explorer 6.0 or later, or the Netscape Navigator 6.0 or later.
- The computer that you are using for initial configuration must have an IP
Address within the same range as the IP Address of the Bridge. The
Bridge has a default IP Address of 192.168.0.30 with a subnet mask of
255.255.255.0.
- You will need to assign a Static IP Address to the computer that you are
using to configure the Bridge, within the IP Address Range of the Bridge.
For example, you can assign a Static IP address of 192.168.0.2 with a
subnet mask of 255.255.255.0.
Factory Default Settings for the Bridge
Operating Mode Infrastructure
SSID default
Channel 6
Transmission rates Auto
Encryption No
Administrator password Blank (no password needed)
IP Address mode Static
IP Address 192.168.0.30
IP Subnet 255.255.255.0
username admin (all lower case)