User's Manual
Table Of Contents
- 19 -
Configuration Screen
SSID
: The Service Set Identifier is the name assigned to the wireless
network. The factory SSID setting is set to
default
. Make changes
here to match the SSID on the existing wireless router or access point.
Wireless Mode
: Infrastructure
is the factory default setting. Ad-
Hoc mode is used for Peer-to-Peer networking.
Channel
:
The default channel setting is channel 6. In Infrastructure
mode, the adapter will automatically select the channel to match the
channel setting for the selected access point. In Ad-Hoc mode, the
channel must be manually set to the same channel for each wireless
adapter.
Tx Rate
: You can adjust the transmission rate to get the best signal
possible depending on your usage and your environment. The Tx
Rate will be determined automatically by signal strength. Default is
set to
Auto
.