User's Manual

Steady orange confirms good connection to LAN or WLAN

connectivity.

Dependent on the data traffic the LED will begin to flash to

indicate that the Wireless Internet Camera is

receiving/transceiving from/to the LAN or WLAN network.

Note:

There are three settings for the LAN/WLAN LED to control the

light illumination for monitoring purpose from Normal / Off /

Dummy. Please refer to the Web Configuration section for

detailed information and usage in the User’ s Guide.

Rear Panel

Network Cable

Connector

DC Power

Connector

I/O Connector

Antenna Connector

Slide Switch

Reset Button

Antenna Connector